SRT8KXLI Features
LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection
Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Smart-UPS On-Line Features & Benefits
Availability
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime Allows additional run time to be quickly added as needed.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageability
Network manageable Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
SmartSlot Customize UPS capabilities with management cards.
LED status indicators Quickly understand unit and power status with visual indicators.
Serial connectivity Provides management of the UPS via a serial port.
Adaptability
Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
Serviceability
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Audible alarms Provides notification of changing utility power and UPS power conditions
Protection
Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable Provides temporary battery power when the utility power is out.
Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output
Output Power Capacity 8000 Watts / 8000 VA
Max Configurable Power 8000 Watts / 8000 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 2%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Other Output Voltages 220, 240
Crest Factor 3 : 1
Topology Double Conversion Online
Waveform Type Sine wave
Output Connections
(1) Hard Wire 3-wire (H N + G)
(6) IEC 320 C13 IEC 320 C13
(4) IEC 320 C19 IEC 320 C19
(3) IEC Jumpers
Bypass Internal Bypass (Automatic and Manual)
Input
Nominal Input Voltage 230V, 400V 3PH
Input Frequency 40 - 70 Hz (auto sensing)
Input Connections
Hard Wire 3 wire (1PH+N+G)
Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations 160 - 275V
Input voltage adjustable range for mains operation 100 - 275 (half load), 173 - 476 (half load)V
Other Input Voltages 220, 240, 380, 415
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 1.50 hour(s)
Replacement Battery
(Service center technician only) APCRBC140
RBC™ Quantity 2
Extended Run Options APC Smart-UPS SRT 8000VA 230V
Runtime Graph
Curve Part Number(s)
A SRT8KXLI
B SRT8KXLI
+ (1)SRT192BP2
C SRT8KXLI
+ (2)SRT192BP2
D SRT8KXLI
+ (3)SRT192BP2
E SRT8KXLI
+ (4)SRT192BP2

Hover over the line on the graph above to view the runtime at any desired load
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
View Enlarged Graph View Runtime Chart
Energy Use/Efficiency
Load Efficiency
25% 93.3%
50% 94.8%
75% 95.0%
100% 94.8%

Hover over the line on the graph above to view the efficiency at any desired load
Curve fit of data measured in accordance with the ENERGY STAR Program Requirements Product Specification for Uninterruptible Power Supplies (UPSs) - Eligibility Criteria Version 1.0. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.
View Enlarged Graph
Communications & Management
Interface Port(s) Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
Available SmartSlot™ Interface Quantity 1
Control panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity
Emergency Power Off (EPO) Yes
Surge Protection and Filtering
Surge energy rating 480 Joules
Physical
Maximum Height 432.00 mm
Maximum Width 263.00 mm
Maximum Depth 715.00 mm
Net Weight 111.82 KG
Shipping Weight 126.82 KG
Shipping Height 461.00 mm
Shipping Width 600.00 mm
Shipping Depth 1000.00 mm
Color Black
Units per Pallet 1.00
Environmental
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95% no%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95% no%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from surface of unit 55.00 dBA
Online Thermal Dissipation 1497.00 BTU/hr
Protection Class IP 20
Conformance
Regulatory Approvals C-tick, CE, CE Mark, EAC, EN 50091-1, EN 50091-2, ENERGY STAR (EU), IEC 60950, IEC 62040-2, IRAM, VDE
Standard Warranty 3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
RoHS Compliant
REACH REACH: Contains No SVHCs
Battery Directive Compliant
Battery Notes Contains Lithium Coin Cell