Zalman ZM850-HP 850W Power Supply, Dual Heatpipe and 140mm Fan, Modular Cabling,

ZM850-HP
Features
ZM850-HP is ultra-quiet power supply complies with ATX12V Version 2.2, and supports the lastest dual-core CPUs(Intel Core2 series/AMD Athlon64-X2 series), as well as the lastest dual graphic card systems(NVIDIA® SLI™-Ready Certified).
Dual Heatpipes Installed for Maximum Cooling Performance and Ultra-Quiet Operation
Dual heatpipes with ultra-high cooling performance incorporated on the main heat sources enable high load operation even at low fan RPM for a dramatic reduction in noise levels.
Improved Power Factor & Reduced Harmonics through Active PFC
By implementing Active PFC(Power Factor Correction), the Power Factor (PF) is improved up to 99% while harmful harmonic frequencies are reduced to meet the Line Harmonic Distortion Requirement of IEC61000-3-2 Class D Specification.
High Efficiency Design and 80 PLUS Certified
This power supply is capable of reaching a maximum of 86% efficiency (230VAC, Full & Typical Load) through its use of high switching frequency and low power-loss circuitry. This product has been certified with the 80 PLUS Power Supply Certification and guarantees a higher efficiency compared to uncertified products.
* 80 PLUS is an innovative, electric utility-funded incentive program that strives to integrate more energyefficient power supplies into desktop computers and servers.
ATX20+4 Pin Main Connector
ATX20+4 Pin Main Connector broadens the range of motherboard compatibility.
Supports ATX12V CPU 4-Pin and EPS12V CPU 8-Pin
Two ATX12V CPU 2 2 (4-Pin) power cables can be combined to form an EPS12V CPU 8-Pin power cable.
Four PCI Express VGA Power 6-Pin & 6+2 Pin Connectors
Four independent 6-Pin Power Connectors (two 6-pin & two 6+2 pin) provide support for Nvidia’s Quad SLI.
Module Cables
Modular cables provide organized cable management and improved air circulation inside the computer case.
Ultra Quiet 140mm Fan
The ultra quiet 2 ball-bearing 140mm fan maximizes the airflow and minimizes the noise level enabling a noiseless computing environment with optimized cooling.
Standby Noise Filter Switch
The 5Vsb Noise Filter eliminates high frequency noise in standby mode.
* The Standby Noise Filter Switch is NOT a power switch. The AC Power Cord MUST be unplugged in order to turn the power supply OFF.
Six Independent +12VDC Outputs
Six +12VDC rails supply power independently to the CPU, VGA, motherboard, and peripheral components for the highest level of stability and performance.
EZ Grip Connectors for ODDs & HDDs
EZ Grip Connectors for easy removal of the plugs from ODDs & HDDs.
Gold-Plated Terminals & 16AWG Wires
All connector terminals are gold-plated to minimize contact resistance and power lose.
16AWG (thicker than 18AWG) wires are incorporated to minimize voltage drop during high load operation.
Sleeved Cables
All power cables are sleeved for easy cable management and improved air circulation inside the computer case.
Multiple Safety Features
Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, Over-Temperature Protection.
WEEE & RoHS
Complies with WEEE & RoHS environmental directives of the European Union.
- WEEE (Waste Electrical and Electronic Equipment)
- RoHS (Restriction of Hazardous Substances)
International Safety and EMC Certifications

To create a true noise-free computer, Zalman’s Quiet CPU Cooler, Quiet VGA Cooler, Heatpipe HDD Cooler, Fanless Northbridge Cooler, and Noiseless Case Fan should be used together with this product.
1. Plugging the main power connector P1 into the motherboard while the product is connected to the AC power source may result in damage to the motherboard.
2. Make sure that the connectors are connected to their designated locations, and that the connectors are not oriented in the wrong direction when connecting the DC output connectors.
3. If the Power On light fails to light up when the main power button is pressed after completing the installation procedure, then some devices may be plugged in incorrectly or the motherboard may be faulty.