Zalman CNPS9500ALED Copper CPU Cooler, 2-Ball bearing, Multi Socket, Ultra Quiet 92mm Fan

CNPS9500A LED
Specifications
- Dimensions : 85(L) x 112(W) x 125(H) mm
- Weight : 530g
- Base Material : Pure Copper
- Dissipation Area : 3,698㎠
- Bearing Type : 2 Ball-Bearing
- Speed : 1,350rpm ± 10% ~
: 2,600rpm ± 10%
- Thermal
Resistance : 0.12 ~ 0.16°C/W
- Noise Level : 18dB ± 10% ~ 27.5dB ± 10%
FAN Speed Controller (FAN MATE 2)
- Dimensions : 70(L) x 26(W) x 26(H)mm
- Weight : 20g
- Output Voltage : 5V ~ 11V ± 2%
- Allowable Power : 6W or lower
- Connector : 3-Pin
※ Directions for Use
Features
1. Does not generate noise or vibration in Silent Mode.
2. Pure copper heatsink with component layout optimized for maximum cooling efficiency.
3. Innovative, patented, and curved heatpipe design for a heat transfer capacity of up to six heatpipes with the use of just three.
4. Ultra slim fins (0.2mm) for minimized weight and reduced airflow resistance.
5. Equipped with Zalman’s low noise 92mm fan.
6. Supports all single and dual core CPUs of Intel’s Socket 775/478 and all single and dual core CPUs of AMD’s Socket AM2/754/939/940.
7. The adjustable fan speed controller (FAN MATE 2) enables control of noise and cooling performance.
Installation Requirements
Cases equipped with an Air Guide must have their Air Guide Ducts removed before installation. Install only on systems meeting the following conditions.
1. There must be no interfering components (e.g. PSU, VGA card) within 56mm distance from the center of the PSU.
2. There must be no interfering components (e.g. ODD) within 45mm distance from the center of the CPU.
3. Case chassis cover must be distanced at least 135mm away from the motherboard.
Components
Common Components
· Cooler (CNPS9500A LED)
· Thermal Grease
· Fan Speed Controller (FAN MATE 2)
· Double-sided Tape (for Fan Mate 2 attachment)
· Cable for Fan Mate 2
· User’s Manual (in English and Korean)
· Clip
Components for Intel Socket 775
· Clip Lever A
· Clip Support for Socket 775
· Backplate for Socket 775
· Four(4) Clip Support Fixing Bolts for Socket 775
Components for Intel Socket 478
· One pair of Clip Supports for Socket 478
* Clip Lever A Component for AMD Socket AM2/754/939/940
· Clip Lever B
Please keep in mind when building a noiseless computer
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
Patent Applications
1. Korean Patent Application No.10-0600448
2. Korean Design Application No. 30-0403411, 0403412
3. Patent Applications pending in over 20 nations around the world including USA, EU, and Japan
Cautionary notes
1. The maximum weight specified for a cooler is 450g for Intel Socket 775/478 and AMD Socket AM2/754/939/940. Special care and attention must be taken when moving a computer equipped with a cooler exceeding the specified weight limit. Zalman Tech Co., Ltd. is not responsible for any damage resulting from moving a computer.
2. Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
3. Do not ingest or make oral contact with the Thermal Grease. If ingested, get medical attention. Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
4. The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the ‘CPU Fan Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,350rpm or lower in the system monitoring program.
5. Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.