| Description |
Lian Li - The Ultimate Craft
Lian Li has more than 20 years experience, and continued to develop the new
technology, the product quality and design is outstanding. Lian Li persisted to
make product in Taiwan, and uses the most outstanding material as well as the
most advanced technical manufacture in order to provide modern art high-quality
goods.
Lian Li put a lot of effect on the external finishing, all the external parts in
hair-line brush anodized aluminum, and no sharp edges!
2008 All new V series, with new style, new structure, and better quality! No
sharp edge inside the chassis, too. There are also protection kit to protect
user’s hand and cables. When come to users’ safety, all the detail counts.
Lian Li - Excellent Design
Lian Li have always put a lot of effort on it's product with latest manufacture
techniques. In some process, Lian Li still asserted in using hand craft to in
certain steps in production. Because of some unique techniques can't be replace
by machines, and it is how much effort Lian Li has put into it's product.
User Interface is very important key in Lian Li chassis. The external fixture,
user interface, and the internal structure all has been test to meet Lian Li’s
high quality standard. 2008 Lian Li launched the all new PC-V2010, with all
aluminum alloy chassis, round edge design with stylish look. PC-V2010 still have
the hair-line brush anodized aluminum finishing and aluminum wheels for better
mobility performance.
It’s not about needing to be big, Nor about trying to be beautiful. The All new
V series is the case which functionality and style converge. Open the side panel
with the tool-less latch welcome you inside, the upright removable motherboard
tray, anti-vibration HDD racks, 14cm silent intake fan with filter, top mounted
multi-media I/O ports, and the graphics card holder have been redesigned –
because when it comes to your comfort, every detail counts
Lian Li Fine Craft Products
Rounded edge, unlike other chassis, using 2mm to 1.2mm thick aluminum panel
formed to this unique design with hair-line brushed anodized aluminum metallic
finishing
PC-V2010 has multi-heat zones design to have better thermal solution and tidy up
internal space.
Huge internal space fits E-ATX motherboard, and graphics card which up to 400mm
long, and there are room for four graphic cards ( total 8 PCI slots). Room for 8
hard drivers, and a lot of internal space for liquid cooling system.
Silent Performance
PC-V2010 separated the system into two zones, allow batter air flow for better
silent performance.
PC-V2010 using large size fans to improve the silent issue, there is a 140mm fan
in the front and the 120mm fan at the rear feature low RPM with high air flow to
get the best balance between silent and cooling. There is a three-speed fan
controller, and factory setting as "Middle"(140mm fan: 980RPM; 120mm
fan:1240RPM)), user can adjust to suit.
To reduce the noise, Lian Li designer fitted the anti-vibration rubber rings on
the fan holder to absorb the vibration which cause the noise.
There are anti-vibration kits fitted in the chassis to stop the vibration which
cause the noise.
Creative Thermal Solution
PC-V series chassis has two heat zones, one zone for motherboard, graphics card
and optical drives, and one zone for 3.5” HDD and power supply unit. To separate
the heat sources for better thermal solution.
Lian Li fitted a 140mm intake fan on PC-V2010, The fan can output high air flow
volume with lower RPM to push the cold air through the HDD rack. There is a
three-speed fan speed controller, factory setting to "Middle" (980RPM), user can
adjust it to suit.
The case front fitted with vented 5.25” bezels, allow the cold air to enter the
chassis, there are air filter on the bezel to stop dust entering the chassis.
There is a 120mm exhaust fan at the rear to draw the hot air out, and improve
the air flow inside the chassis. Controlled by a three-speed fan controller,
factory setting to Middle (1240RPM), user can adjust it to suit.
PC-V2010 fitted a three speed fan controller, user can adjust the fan speed to
get the best balance between silent and cooling. Factory setting to "Middle" and
user can adjust it to suit.140mm Fan: 800~980~1180RPM; 120mm Fan:
1024~1240~1500RPM.
Where air enter the chassis, there is a need for an air filter to hold the dust.
PC-V2010 fitted a washable air filter, it can easy remove from the fan unit, no
tool required, and it is recyclable.
There are vents for optional graphics card cooler, user can choose 120mm BS-03,
or 140mm BS-06 to improve the cooling for graphics card.
PC-V2010 equipped a vented PCI bracket, it can improve the cooling issue at the
lower part of the motherboard.
Today’s motherboards using heat pipe solution to solve the heating problem,
therefore the all new V series change the motherboard back to up-right position,
and there are opening on he motherboard tray allow to air to cool the rear of
the motherboard.
Height adjustable!
PC-V2010 fitted a 120mm fan on the graphics card holder to cool the memory and
north bridge chip set. Controlled by a three-speed fan controller, factory
setting to Middle (1240RPM), user can adjust it to suit.
Power supply unit located at the lower part of the chassis, and it can get the
cool air from the bottom of the chassis. Ideal for keep power supply in lower
temperature to keep in best output performance, also keep the components cold to
extend the life cycle.
There are two openings on the rear of the top cover, for user who want to use
liquid cooling system in PC-V2010. There are also two dust-free cover to cover
up the openings.
User Friendly Design
Solid side panel can be released by pulling out a latch, no tool required! User
can easy access the case.
Hard Disk mounted with latest Anti-Vibration System. No Tool required! Simply
using thumb screws secure the rubber rings on the hard disk, and slide into the
HDD rack.
The Motherboard tray is removable. User just release two fixing thumb screws at
the rear, and the motherboard tray can be released. User can put the motherboard
tray on the table top, and no more working in the narrow space .
Front intake Fan with Air Filter mounted with thumb screws, by release the thumb
screws, user can remove the fan unit, easy for service the fan or clean up the
air- filter.
PC-V2010 has room to hold up to two 220mm long power supply units. The power
supply mounted on a fixing plate, simply slide out the power supply for service.
Lian Li Designer putting some effect to protect user’s hardware. There is a lock
at the rear of the case for lock the side panel to stop people to access the
chassis.
There is a set of wheels at the base of the chassis, for user to move the case
around, it is made of high quality aluminum alloy. Lian Li designer also put in
a lock to hold the wheel in position.
For user who has high end graphics card, PC-V2010 fitted a graphics card holder
to support the graphics card, and hold it in position. To avoid it from bending
.
There are two sizes of holders include in the accessories box. User can use the
right size to fit their need.
The multi-media I/O ports has upgraded onPC-V2010! Now the I/O ports located on
the top of the case for easy access. Due to today's requirement, Lian Li
designer add extra USB ports, and provide new interface, now PC-V2010 has total
four USB 2.0 ports, and E-SATA connectors. There are also a dust -free cover to
protect the I/O ports.
There is a Lian Li Patented power supply holder on PC-V2010, to press down the
power supply, and hold it in position.
Model PC-V2010A/B
Case Type Full Tower
Dimensions 210 x 620 x 590mm ( W, H, D)
Front bezel Material Aluminum
Color Silver / Black
Side Panel Plain
Body Material Aluminum
Net Weight
5.25" drive bay (External) 7
3.5" drive bay (External)
3.5" drive bay (Internal) 8
Expansion Slot 8 (Support CrossFireX, Quad SLI)
Motherboard E-ATX, ATX, M-ATX
System Fan (Front) 14cm x 1 (3-speed 800 ~980~1180 RPM) Factory setting to Mid
Speed @980RPM
System Fan (Top)
System Fan (Rear) 12cm x 2 (3-speed 1020~1240~1500 RPM ) Factory setting to Mid
Speed @1240RPM
I/O Ports USB2.0 x 4, IEEE1394 x 1, E-SATA x 1, HD+AC97 Audio
Key Features
Hand Crafted,
Made in Taiwan
Hair-line Brush & Anodized Finishing
Heat Zone Design (Separate into Two Heat Zones)
Huge Internal Space, Fit E-ATX and Graphics Cards upto 400mm Long
Graphics Cards Support Holder
Huge Internal Space Holds Dual Power Supply Units which upto 220mm Long
140mm Huge High Air-Flow Sient Fan
120mm Silent Fan for Memery, and North Bridge Chip Sets, High Adjustable!
120mm Huge Silent exhaust Fan
Build-in Three Speed Fan Controller
Intake Fan With Washable Air Filter
PCI Brackets with Vent Holes, Vents for Optional Graphics Card Cooler
Optional Graphics Card Cooler, 120mm (BS-03)or 140mm (BS-06)
Silde-out Power Supply Tray, Can Rotate 180 Degree
Removable Motherboard Tray
Tool-less Side Panel Latch with Lock
Anti-Vibration Kit on Chassis
Anti-Vibration HDD Racks
High Quality Aluminum Wheel Set
Security Lock
Lian Li Patented Power Supply Holder
Multi-meida I/O Ports on Top of The Case
5.25" Bezel with Vent and Filter
Support Liquid Cooling System, Dust - Free Covers included.
|