Zalman CNPS9300AT CPU Cooler, 2-Ball bearing, Multi Socket, Low noise 92mm PWM Fan

CNPS9300 AT
Innovatiive, patented and curved heatpipe design for a heat transfer capacity of up to four heatpipes with the use of just two.
Pentium 4, Celeron D, Pentium D, Core 2 Duo, Core 2 Quad, Core 2 Extreme, Sempron, Athlon 64, Athlon 64 X2, Athlon 64 FX, Opteron, Dual-Core Opteron, Phenom
The Best of 2007: X-bit Labs Reader’s Choice Awards
Socket CPU CPU Compatibility
Intel 775 Celeron D Supports all speeds
Pentium 4
Pentium D
Pentium Dual-Core
Core 2 Duo
Core 2 Quad
Core 2 Extreme
AMD AM2+ Sempron Supports all speeds
Athlon 64
Athlon 64 X2 Dual-Core
Athlon 64 FX
Phenom
AM2 Sempron Supports all speeds
Athlon 64
Athlon 64 X2 Dual-Core
Athlon 64 FX
754 Sempron Supports all speeds
Athlon 64
939 Athlon 64 Supports all speeds
Athlon 64 X2
Athlon 64 FX
Opteron
Dual-Core Opteron
940 Athlon 64 FX Supports all speeds
Opteron
Dual-Core Opteron
Cases equipped with an Air Guide must have their Air Guide Ducts removed before installation. Install only on systems meeting the following conditions.
There must be no interfering components (e.g. PSU, VGA card) within 54mm distance from the center of the PSU.
There must be no interfering components (e.g. ODD) within 31mm distance from the center of the CPU.
Case chassis cover must be distanced at least 143mm away from the motherboard.
Dimensions 61.35(L) x 108(W) x 132.5(H) mm
Weight 407g
Base Material Pure Copper & Pure Aluminum
Dissipation Area 2,583㎠
Bearing Type Superflo
Speed 1,500rpm ± 15 % ~ 2,400rpm ± 10 %
Noise Level(1) 20.0dBA ~ 30.0dBA ± 10%
Control Method PWM Control, Auto Restart
Life Expectancy 50,000 hours
(1) Measured 1m distance away from source.
Does not generate noise or vibration in Silent Mode.
Compatible with all Intel Socket 775 based Single, Dual, and Quad Core CPUs, and all AMD Socket AM2+, AM2, 754, 939, 940 based Single, Dual, and Quad Core CPUs.
100% copper heatsink with aerodynamically optimized “tunnel” design for maximum cooling efficiency.
Patented “figure 8” heatpipe design for cooling performance of up to 4heatpipes with the use of just 2.
Low-noise 92mm PWM fan for automatic control of the fan’s RPM according to the CPU’s temperature.
Common Components
- Cooler (CNPS9300 AT)
- Thermal Grease
- Clip
- Clip Lever
- User’s Manual
Components for Intel Socket 775
- Four (4) Clip Support Fixing Bolts
- One (1) Clip Support for Socket 775
- One (1) Backplate for Socket 775
- One (1) Clip (S-Type)
- Four (4) Bolts (for installing the cooler)
Component for AMD Socket AM2+/AM2/754/939/940
* No additional components
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
Check the components list and condition of the product before installation. If any problem is found, contact your place of purchase to obtain a replacement.
Do not ingest or make oral contact with the Thermal Grease. If ingested, get medical attention.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
The operation of the PWM fan varies depending on the M/B setting. Please activate the PWM control mode from BIOS after installing. Refer to the motherboard manual for detailed information regarding the PWM control mode.
Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.