Lian Li PC-A7010 Black Aluminum Full Tower Case w/ SATA Hotswap

Full Tower Chassis
Quality
Lian Li - The Ultimate Craft
Lian Li has more than 20 years experience, and continued to develop the new technology, the product quality and design is outstanding. Lian Li persisted to make product in Taiwan, and uses the most outstanding material as well as the most advanced technical manufacture in order to provide modern art high-quality goods.
Lian Li put a lot of effect on the external finishing, all the external parts in hair-line brush anodized aluminum to create the metallic look, all chassis with no sharp edges! To ensure the user's safety
PC-A7010 designed for High end user, user can set up the hardware to the way they want it to be. To made this chassis even better, Lian Li designer built in a SATA hot swap raid HDD cage, it not just only easy to use, and it also support Raid feature. PC-A7010 manufactured under high quality workmanship! No sharp edge inside the chassis, too. There are also protection kit to protect user’s hand. When come to users’ safety, all the detail counts.
Design
Lian Li - Excellent Design
Lian Li have always put a lot of effort on it's product with latest manufacture techniques. In some process, Lian Li still asserted in using hand craft to in certain steps in production. Because of some unique techniques can't be replace by machines, and it is how much effort Lian Li has put into it's product.
User Interface is very important key in Lian Li chassis. The external fixture, user interface, and the internal structure all has been test to meet Lian Li’s high quality standard. 2008 Lian Li launched the all new PC-A7010, with all aluminum alloy chassis, shape & simple design with minimalism stylish look.
The PC-A7010 is the case which functionality and style converge, features the upright removable E-ATX motherboard tray, anti-vibration HDD racks, four 12cm silent intake fans with filter, top mounted multi-media I/O ports, and the graphics card holder, and lots more – because when it comes to your comfort, every detail counts
Feature
Lian Li Fine Craft Products
It not able luxury, or costliness, PC-A7010 equipped SATA HDD Raid HDD cage to help your life easier. You can have more time to enjoy your life, no more working with wire. It also features Raid function. ( Still need the support from the M/B or SATA Raid Card chipset)
PC-A7010 has equipped four 120mm cooling fans in the fornt of the chassis, there are two fans intake the cool air into the case, and two fans next to the HDD cage to draw the air to improve the air flow. The Fan not only cool the HDD down, it also help the motherboard's North & South bridge chipset, and the graphics card.
Huge internal space fits E-ATX motherboard, and graphics card, which can up to 345mm long, and there are room for 10 hard drivers, there are space for dual power supply units. There are total of 6 x 12cm cooling fans to cool the system down, and a lot of internal space for liquid cooling system. It is an ideal for gamer and pro user!
Silent
Silent Solution
PC-A7010 equipped total six fans to keep the system cool. To reduce the nosie, PC-A7010 has fitted a three-speed fan speed controller, which can adjust six fans, speed from 1020 to 1240 to 1500 RPM. Factory setting to Middle (1240RPM). User can adjust the fan speed to get the best ballance of silent and cooling.
There two 120mm intake fans in the front of the case, two in the middle, and two at the rear. To use large size fan, for inputting large amount of air volume while at the low speed. It can be adjusted by a three-speed fan controller, factory setting at middle (1240RPM). User can adjust it to suit.
PC-A7010 has equipped anti-vibration system to the HDD cage at the rear of the case, by using rubber ring to hold the HDD in the HDD cage, to reduce the noise which cause by the vibration.
All the moving parts has also equipped anti-vibration kit to reduce the vibration, and lower the noise.
Thermal
Creative Thermal Solution
PC-A7010 is using "Thermal Tunnel" solution, the two 120mm fans in the front input cold air into the system, the two 120mm fans and the PSU's fan draw the hot air out as a heat circulation . To have extra cooling performance to the motherboard and graphics card, there are two 120mm fans behind the HDD cage to improve the air flow to cool the system down.
There are two 120mm intake fan on PC-A7010, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack. It connected to a three-speed controller, factory setting at middle(1240RPM), user can adjust it to suit.
The case front intake fans has equipped air filter, to stop dust entering the chassis. These air filter were washable, envirnoment friendly.
There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis. It can be controlled by a fan speed controller, factory setting to Middle (1240RPM), user can adjsut it to suit.
The HDD cage also fitted a 120mm exhaust fan to draw the hot air out, to keep the HDD cold, and remove the hot air from the system.It can be controlled by a fan speed controller, factory setting to Middle (1240RPM), user can adjsut it to suit.
There are alot of M/B using heat pipe solution, PC-A7010 can 100% support them, for extra cooling, there are openning on the M/B tray, allow air to cool the rear of the M/B.
There is a smart way to control the fan speed. PC-A7010 equipped a three-speed fan controller, user can easy adjust the fan speed of six fans to suit their need, when there is not hot inside the system, switch it to low speed, to make it silent and to extend fan's life cycle. Factory setting to Middle (1240RPM), user can adjust the fan speed from 1020~1240~1500RPM to suit.
Power supply unit located at the lower part of the chassis, and it can get the cool air from the bottom of the chassis. Ideal for keep power supply in lower temperature to keep in best output performance, also keep the components cold to extend the life cycle.
There are opening for water tubes on rear panel. Ideal for user who would like to fit liquid cooling system into PC-A7010.
Friendly
User Friendly Design
The top cover can be remove for service or upgrade. There are alot of optional kit for user to upgrade.
Hard Disk mounted with latest Anti-Vibration System. No Tool required! Simply using thumb screws secure the rubber rings on the hard disk, and slide into the HDD rack.
The Motherboard tray is removable. User just release two fixing thumb screws at the rear, and the motherboard tray can be released. User can put the motherboard tray on the table top, and no more working in the narrow space .
Front panel fitted with easy attach kit, it can remove without tool, user can service the air-filter or fan easier
PC-A7010 has room to hold up to two 220mm long power supply units. The power supply mounted on a fixing plate, simply slide out the power supply for service.
For user who has high end graphics card, PC-A7010 fitted a graphics card holder to support the graphics card, and hold it in position. To avoid it from bending .
There are two sizes of holders include in the accessories box. User can use the right size to fit their need.
The I/O ports located on the top of the case for easy access. Due to today's requirement, Lian Li designer add extra USB ports, and provide new interface, now PC-A7010 has total four USB 2.0 ports, and E-SATA connectors. There are also a dust -free cover to protect the I/O ports.
Specification
Model PC-A7010
Case Type Super Full Tower
Dimensions 220 x 595 x 590mm ( W, H, D)
Front bezel Material Aluminum
Color Black
Side Panel Plain
Body Material Aluminum
Net Weight
5.25" drive bay (External) 5
3.5" drive bay (External) 1 ( Using 1 x 5.25
3.5" drive bay (Internal) 10 ( SATA Radi x 7)
Expansion Slot 7
Motherboard EATX, ATX, M-ATX
System Fan (Front) 120mm Ball-Bearing Fan x 4 (1020~1240~1500RPM)
System Fan (Top)
System Fan (Rear) 120mm Ball-Bearing Fan x 2 (1020~1240~1500RPM)
I/O Ports USB2.0 x 4, IEEE1394 x 1, ESATA x 1, HD+AC97 Audio
Features
Made in Taiwan, Hand crafted
Hair-line brushed anodized aluminum surface
SATA Hot Swap HDD Cage, Support Raid
Room For E-ATX Board and 345mm long Graphics cards
Graphics Card Support Holder
Lower Power Supply Unit Cage with Anti-Vibration Rubber to reduce the vibration noise
Four 120mmFan in the front of the case to improve air flow
Support Liquid Cooling System
Dual 120mm Exhaust Fan
Three-Speed Fan Controller
Build-in Washable Air Filter
Optional Graphics Card Cooler
Removable Top Cover
Easy Remoable Front Panel
Removable Motherboard Tray
Support Dual Power Supply Setting
Anti-Vibration Kit on Chassis
HDD cage with Anti-vibration Kit
Multi-Media I/O Ports with Dust Free Cover