Lian Li PC-V2110 Black Aluminum Full Tower Slient Case w/ Door

Chassis with Silent Solution
Quality
Lian Li - The Ultimate Craft
Lian Li has more than 20 years experience, and continued to develop the new technology, the product quality and design is outstanding. Lian Li persisted to make product in Taiwan, and uses the most outstanding material as well as the most advanced technical manufacture in order to provide modern art high-quality goods.
Lian Li put a lot of effect on the external finishing, all the external parts in hair-line brush anodized aluminum with solid aluminum extrusion door in sandblasted finishing, all chassis with no sharp edges!
2008 All new V series, with new style, new structure, and better quality! No sharp edge inside the chassis, too. There are also protection kit to protect user’s hand and cables. When come to users’ safety, all the detail counts.
Design
Lian Li - Excellent Design
Lian Li have always put a lot of effort on it's product with latest manufacture techniques. In some process, Lian Li still asserted in using hand craft to in certain steps in production. Because of some unique techniques can't be replace by machines, and it is how much effort Lian Li has put into it's product.
User Interface is very important key in Lian Li chassis. The external fixture, user interface, and the internal structure all has been test to meet Lian Li’s high quality standard. 2008 Lian Li launched the all new PC-V2110, with all aluminum alloy chassis, shape & simple design with minimalism stylish look. PC-V2110 still have the hair-line brush anodized & sandblasted aluminum finishing and aluminum wheels for better mobility performance.
It’s not about needing to be big, Nor about trying to be beautiful. The All new V series is the case which functionality and style converge. Open the side panel with the tool-less latch welcome you inside, the upright removable motherboard tray, anti-vibration HDD racks, 14cm silent intake fan with filter, top mounted multi-media I/O ports, and the graphics card holder have been redesigned – because when it comes to your comfort, every detail counts
Feature
Lian Li Fine Craft Products
Minimalism Style, unlike other chassis, it has Simple and Clean shape! Using 2mm to 1.2mm thick aluminum panel formed to this unique design in hair-line brushed anodized aluminum metallic finishing, with a solid aluminum extrusion door panel in sandblasted finishing.
PC-V1110 has multi-heat zones design to have better thermal solution and tidy up internal space.
Huge internal space fits E-ATX motherboard, and graphics card which up to 395mm long, and there are room for 8 hard drivers, and a lot of internal space for liquid cooling system.It is an ideal for gamer and pro user!
Silent
Silent Performance
PC-V2110 separated the system into two zones, allow better air flow for better silent performance.
PC-V2110 using large size fans to improve the silent issue, there is a 140mm fan in the front and the 120mm fan at the rear feature low RPM with high air flow to get the best balance between silent and cooling. There is a three-speed fan controller, factory setting to " Middle" (980RPM), user can adjust to suit.
To reduce the noise, Lian Li designer fitted the anti-vibration rubber rings on the fan holder to absorb the vibration which cause the noise.
Inside the PC-V2110, there are sound insulation material on the side panel to cut down the noise level, to enhance the performance, there are also sound insulation material under the top panel to make the silent performance better!
Lian Li designer want to reduce the optical drives' noise, they had fitted rubber strips inside the door panel.
There are anti-vibration kits fitted in the chassis to stop the vibration which cause the noise.
Thermal
Creative Thermal Solution
PC-V series chassis has two heat zones, one zone for motherboard, graphics card and optical drives, and one zone for 3.5” HDD and power supply unit. To separate the heat sources for better thermal solution.
Lian Li fitted a 140mm intake fan on PC-V2110, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack. There is a three speed fan controoler, factory setting to Middle (980RPM), user can adjust it to suit.
The case front fitted with vented 5.25” bezels, allow the cold air to enter the chassis, there are air filter on the bezel to stop dust entering the chassis.
There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis. There is a three speed fan controoler, factory setting to Middle (1020RPM), user can adjust it to suit.
PC-V2110 fitted a three-speed fan controller, user can adjust the fan speed to get the best balance between silent and cooling. Factory setting to Middle, user can adjust to suit. (120mm fan : 1020~1240~1500RPM) (140mm fan: 800~980~1180RPM)
Where air enter the chassis, there is a need for an air filter to hold the dust.
PC-V2110 fitted a washable air filter, it can easy remove from the fan unit, no tool required, and it is recyclable.
Height adjustable Chip set cooler !
PC-V2110 fitted a 120mm fan on the graphics card holder to cool the memory and north bridge chip set. There is a three speed fan controoler, factory setting to Middle (1020RPM), user can adjust it to suit.
Power supply unit located at the lower part of the chassis, and it can get the cool air from the bottom of the chassis. Ideal for keep power supply in lower temperature to keep in best output performance, also keep the components cold to extend the life cycle.
There are opening for water tubes on rear of the top cover. Ideal for user who would like to fit liquid cooling system into PC-V2110.
Friendly
User Friendly Design
Solid side panel can be released by pulling out a latch, no tool required! User can easy access the case.
Hard Disk mounted with latest Anti-Vibration System. No Tool required! Simply using thumb screws secure the rubber rings on the hard disk, and slide into the HDD rack.
The Motherboard tray is removable. User just release two fixing thumb screws at the rear, and the motherboard tray can be released. User can put the motherboard tray on the table top, and no more working in the narrow space .
Front intake Fan with Air Filter mounted with thumb screws, by release the thumb screws, user can remove the fan unit, easy for service the fan or clean up the air- filter.
PC-V2110 has room to hold up to one 220mm long power supply unit. The power supply mounted on a fixing plate, simply slide out the power supply for service.
Lian Li Designer putting some effect to protect user’s hardware. There is a lock at the rear of the case for lock the side panel to stop people to access the chassis.
There is a set of wheels at the base of the chassis, for user to move the case around, it is made of high quality aluminum alloy. Lian Li designer also put in a lock to hold the wheel in position.
For user who has high end graphics card, PC-V2110 fitted a graphics card holder to support the graphics card, and hold it in position. To avoid it from bending .
There are two sizes of holders include in the accessories box. User can use the right size to fit their need.
The multi-media I/O ports has upgraded onPC-V2110! Now the I/O ports located on the top of the case for easy access. Due to today's requirement, Lian Li designer add extra USB ports, and provide new interface, now PC-V2110 has total four USB 2.0 ports, and E-SATA connectors. There are also a dust -free cover to protect the I/O ports.
Specification
Model PC-V2110A/ B
Case Type Super Full Tower
Dimensions 210 x 620 x 620 ( W, H, D)
Front bezel Material Aluminum
Color Silver / Black
Side Panel Plain
Body Material Aluminum
Net Weight
5.25" drive bay (External) 7
3.5" drive bay (External)
3.5" drive bay (Internal) 8
Expansion Slot 8
Motherboard E-ATX, ATX, M-ATX
System Fan (Front) 14cm Ball Bearing Fan x 1 (800~980~1180 RPM)Factory Setting to Mid speed: 980RPM
System Fan (Top)
System Fan (Rear) 12cm Ball Bearing Fan x 2 (1020~1240~1500 RPM)Factory Setting to Mid speed: 1240RPM
I/O Ports USB2.0 x 4, IEEE1394x1, E-SATA x 1, AC97+HD Audio
Key Features
Hand Crafted,
Made in Taiwan
Hair-line Brush & Anodized Finishing
Heat Zone Design (Separate into Two Heat Zones)
Huge Internal Space, Fit E-ATX and Graphics Cards upto 400mm Long
Graphics Cards Support Holder
Huge Internal Space Holds Dual Power Supply Units which upto 220mm Long
140mm Huge High Air-Flow Sient Fan
120mm Silent Fan for Memery, and North Bridge Chip Sets, High Adjustable!
120mm Huge Silent exhaust Fan
Build-in Three Speed Fan Controller
Intake Fan With Washable Air Filter
Optional Graphics card cooler for Extra cooling performance
Rubber Sound Insulation Strips Insdie the Door Panel
Sound Insulation Material on The Inside Surface of Side Panels and Top Covers
Removable Motherboard Tray
Tool-less Side Panel Latch with Lock
Anti-Vibration Kit on Chassis
Anti-Vibration HDD Racks
High Quality Aluminum Wheel Set
Security Lock
Lian Li Patented Power Supply Holder
Multi-meida I/O Ports on Top of The Case
5.25" Bezel with Vent and Filter
Support Liquid Cooling System, Dust - Free Covers included.