J&W JW-RX770X-AM2+ AMD 770G, SB 600, DDR2, SATAII, Singel LAN, PCIe,

JW-RX780X-AM2+ (SC)
1. Support AM2 and AM2+ CPUs
2. HyperTransport 3.0
3. PCI-Express 2.0
4. ATI CrossFire
5. 1066 MHz Memory
6. 8 CH HD Audio
7. Gigabit LAN
8. S/PDIF (Coxial + Optical)
9. Debug LED
10. eSATA
Specification
CPU Supports AMD® Socket AM2+/ AM2 processors:
AMD Phenom™FX / Phenom™ / Athlon™ 64 FX / Athlon™ 64 X2 Dual-Core/ Athlon™ 64 / Sempron™ processors
Hyper Transport Bus 5200/2000 MT/s (HT 3.0/1.0)
Chipset North Bridge: AMD® 770
South Bridge: AMD® SB600
Memory 4 x 1.8v DDR2 DIMM sockets supporting up to 8 GB of system memory
Dual channel memory architecture
Support for DDR2 1066/800/667 MHz memory modules
Support ECC Memory(CPU dependent)
Audio Realtek® ALC 888 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF In/Out
Support for CD In
LAN Marvell® 88E8056 PCIe LAN (10/100/1000 Mbit)
Single on JW-RX780X-AM2+, Dual on JW-RX780X-AM2+ (CS)
Expansion Slots 2 x PCI-Express x16 slots supporting ATI CrossFire™ Technology (16x + 4x physical speed)
(The PCIE2 slot supports x16; the PCIE4 slot supports x4. Both PCI-E x16 slots conform to PCI Express 2.0 standard.)
2 x PCI Express x1 slots
2 x PCI slots
Storage Interface South Bridge (SB600):
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
Support for SATA RAID 0, RAID 1 and RAID 0+1
Winbond W83627EHG chip:
1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB Integrated in the South Bridge
Up to 10 USB 2.0 ports (4 on the back panel, remaining 6 via the USB headers)
Internal I/O Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12v power connector
1 x 4-pin PCI-E 12v power connector
1 x floppy disk drive connector
1 x IDE connector
4 x SATA 3Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x front panel header
1 x front panel audio header
1 x CD In connector
1 x S/PDIF In/Out header
3 x USB 2.0 headers (for additional 6 USB outputs via cables)
1 x IR header
1 x buzzer header
Back Panel Connectors 1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x Debug LED
1 x serial port
1 x eSATA port (through cable extension)
1 x coaxial S/PDIF In connector
1 x optical S/PDIF Out connector
4 x USB 2.0/1.1 ports
1 x RJ-45 port
6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out) /
Center / Subwoofer Speaker Out / Side Speaker Out)
I/O Controller Winbond W83627EHG chip
H/W Monitoring System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU fan speed control
BIOS 1 x 8 Mbit flash
Use of licensed AMI BIOS
Operating System Support Microsoft Windows Vista/XP/2000
Form Factor ATX Form Factor; 305 mm x 245 mm
Remark 1066 MHz memory support is dependent on the CPU being used.
ECC memory support is dependent on the CPU being used.
If you are installing a single PCI-E x16 graphics card, please install it into the PCIE2 slot for optimum performance.