|
|
 |
D-LINK DFE-550TX PCI Bus 10/ 100M Network Card With Wake-On-Lane & DMI.
|
|
|
 |
Product Features |
 |
|
| Product ID |
4399 |
| Brand |
D-Link |
| Vendor Code | DFE-550TX |
| Description |
10/100Mbps Adapter with Advanced Functions
The DFE-550TX is a high-performance auto-sensing 10/100Mbps network adapter for
desktop PCs. The adapter is equipped with advanced features and is an excellent
choice for powerful PCs directly connect to a LAN switch in a dedicated
bandwidth workstation or high-speed server configuration.
Wake-On-LAN for Power Management
Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function
allowing a powered OFF computer to be powered ON from a remote station. This
function allows the user to send a Wake-up signal to a computer. The WOL
function provides a great utility for power management of PC and allows users to
initiate action at irregular times and from distant locations.
High Performance
With 32-bit Bus Master operation, the adapter guarantees the highest performance
for power workstations and servers. Bus Master transfers data directly between
the adapter and the host at multi-megabits per second, bypassing the host CPU to
alleviate its workload. This allows the host to concentrate on the application
at hand.
Secure Transmission
In the fast 200Mbps full-duplex mode, the adapter's embedded flow control
provides a means to protect users against possible data loss during transmission
on the network. When connected to a LAN switch that supports flow control, the
adapter receives signals from the switch regarding buffer overrun during peak
usage periods. The adapter then delays transmission until the switch is ready
again to accept new data.
Flexible Connection
The adapter's single connector connects to either 10BASE-T Ethernet or
100BASE-TX Fast Ethernet. 10/100Mbps and full/half duplex are auto-negotiated,
completely without users' need to intervene.
IP Multicasting for Bandwidth Saving
With IP multicast support, the adapter can be configured with a Layer 3 switch
or router. Multicast IP allows a host to be a member of one or more multicast
groups and is useful for applications like live stock quotes, multiparty video-
conferencing. Multicast IP conserves bandwidth by forcing the network to do
packet replication only when necessary. In applications where compressed audio
and video signals are transmitted as sequences of UDP packets to group address,
multicast IP can eliminate users' need to maintain parallel networks for voice,
video and data.
Traffic Monitoring & Management
The adapter provides 16 on-board statistic counters to register packet status,
allowing users to monitor and manage network information. Using Intel's LAN Desk
Client Manager (LDCM) driver, users can view the statistics from a PC.
RPL and PXE Remote Boot Options
2 remote boot options are available for selection. Administrators can choose to
set up a security scheme for diskless workstations to boot from servers using
(1) the traditional Remote Program Load (RPL) or (2) Intel's Pre-boot Execution
Environment (PXE). Stations with boot ROMs installed on the adapter's on-board
socket can boot O.S. from NetWare, NT and other servers to run applications
designated by the administrator.
Key features
10/100Mbps auto-sensing with single shielded RJ-45 connector
32-bit PCI Bus Master operation
Full/half duplex for 10BASE-T, 100BASE-TX
Wake-on-LAN (WOL) function
IEEE 802.3x flow control for connection to LAN switch
16 on-board counters for statistic report (DMI driver provided)
IP multicast address filter mechanism
Low network command processing overhead
Run Win95, 98, NT, NetWare, OS/2, Unix, other O.S.
Optional boot ROM for remote program load from servers
Technical Specifications
Standards:
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
ANSI/IEEE 802.3 NWay auto-negotiation
PCI local bus 2.1 specifications
IEEE 802.3x Flow Control
Topology
Star
Protocol
CSMA/CD
Network Data Transfer Rates
10BASE-T:
10Mbps (half-duplex)
20Mbps (full-duplex)
100BASE-TX:
100Mbps (half-duplex)
200Mbps (full-duplex)
Network Cables
10BASE-T:
2-pair UTP Cat. 3 (100m)
4-pair UTP Cat. 4, 5 (100m)
EIA/TIA-568 150-ohm screened twisted-pair (STP) (100m)
100BASE-TX:
4-pair UTP Cat. 5 (100m)
EIA/TIA-568B 150-ohm screened twisted-pair (STP) (100m)
Diagnostic LED Report
Link
Activity (Tx/Rx)
Cache Buffer
2K bit receive FIFO
2K bit transmit FIFO
IRQ
Allocated by system
I/O Address
Allocated by system
Wake-On-LAN
Standards
Advanced Configuration and Power Interface (ACPI) v.1.0
Intel Desktop Management Interface (DMI) v.2.0
Intel Pre-boot Execution Environment (PXE) v.2.0
Methods Supported
AMD Magic Packet support
Wakeup Frame and Media Change support (after Win NT 5.0 release, EEPROM firmware
upgradable)
IP Multicast Routing
IP Addressing
Class D
Multicast Routing Protocols
DVMRP
MOSPF
Environmental & Physical
Power Consumption
4.0 watts (maximum)
Dimensions
14 x 7.4 cm
(0.46 x 0.24 inch)
Weight
60g (0.13 pound)
Operating Temperature
0 - 50 C (32 - 122 F)
Storage Temperature
- 25 - 55 C (-13 - 131 F)
Humidity
10% - 90% non-condensing
Emission
FCC Class B
CE Mark
Canada ICES-003 Class B
CISPR Class B
VCCI Class B
C-Tick
Network O.S. Drivers
Novell NetWare ODI driver
Novell NetWare Server, Client 32 for DOS/Windows
Microsoft NDIS drivers
Microsoft Windows 95, 98, ME, 2000, XP
Microsoft NT 3.51/4.0
Microsoft Workgroups
Packet driver
FTP PC/TCP
NCSA
DMI 2.0
|
| Warranty | 1 Year Manufacturer's return to base | | Link | D-LINK DFE-550TX PCI Bus 10/ 100M Network Card With Wake-On-Lane & DMI. |
| Product image and
description may vary due to insufficient information from vendor. Please base
you purchase decision on the product title and vendor code. |
|
|
Other customers who bought this also bought |
|
|
|
|
|
|
|