Zalman CNPS7500-Cu-LED Aluminium/ Copper CPU Cooler with LED

CNPS7500-Cu LED

Notices for Intel 478 socket based CPU installation
1) As shown in Figure 2, a motherboard that is not compliant with the "10.2mm motherboard component height restriction" standard, introduced by Intel, may create interference between components and the clip of CNPS7500 LED. Please do not install the CNPS7500 LED if this interference is observed.
2) No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
Notices for Intel 775 socket based CPU installation
No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
Notices for AMD AM2/754/939/940 socket based CPU installation
No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
AMD sockets require Stock Retention Frame.

Specifications
FHS
Dimensions 121(L) X 121(W) X 67(H) mm
Weight 848g
Base Material Pure Copper
Dissipation Area 3,500cm2
Fan
Bearing Type 2 Ball-Bearing
Speed(1) 1,150rpm ± 10% ~ 2,300rpm ± 10%
Noise Level(2) 17dBA ± 10% ~ 32dBA ± 10%
(1) The fan operates at 2,550rpm (34.5dBA) if directly connected to the motherboard’s power connector
without the use of Fan Mate 2.
(2) Measured 1m distance away from source.

FAN Speed Controller (FAN MATE 2)
- Dimensions : 70(L) x 26(W) x 26(H)mm
- Weight : 20g
- Output Voltage : 5V ~ 11V ± 2%
- Allowable Power : 6W or lower
- Connector : 3-Pin
Features
1. Does not generate noise or vibration in Silent Mode.
2. Pure copper base materials ensure excellent heat dissipation.
3. Compatible with all single and dual core CPUs for Intel Socket 775/478 and AMD Sockets AM2/754/939/940.
4. The high intensity blue LED installed silent 110mm fan inside the heatsink maximizes cooling performance.
5. The adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.
Components
Common Components
1) Cooler (CNPS7500-Cu LED)
2) Thermal Grease
3) Fan Speed Controller (FAN MATE 2)
4) Double-sided Tape (for FAN MATE 2 attachment)
5) Cable for FAN MATE 2
6) User’s Manual (in English and Korean)
Components for Intel Socket 775
7) One (1) Clip Support for Socket 775
8) One (1) Backplate for Socket 775
9) Four (4) Clip Support Fixing Bolts
10) One (1) Clip Lever
Components for Intel Socket 478
11) One pair of Clip Supports for Socket 478
* Component 10)
Component for AMD Socket AM2/754/939/940
* Component 10)
Please keep in mind when building noiseless computer
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
Patent Applications
1. Korean Patent Reg. No. 389257
2. Korean Design Reg. No. 327440-3
3. Patent applications pending in over 20 nations around the world including USA, EU, and Japan.
Cautionary notes
1. The maximum weight for a cooler is specified as 450g for Intel Socket 775/478 and AMD Sockets AM2/754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer.
2. The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the ‘CPU Fan Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,150rpm or lower in the system monitoring program.
3. Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.