Access, Aggregation or Collapsed Core

You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.

Multi-Gigabit for Future-Proof Deployments

With or without PoE, the switches provide two Multi-Gigabit RJ-45 ports that support 5G, 2.5G, and 1G; another two Multi-Gigabit RJ-45 ports that support 2.5G and 1G; four 1G RJ-45 ports; one dedicated 10G RJ-45 uplink port (which also supports 5G, 2.5G and 1G); and one dedicated SFP+ fiber uplink port that supports 10G and 1G.

Comprehensive L2+/Layer 3 Lite Features

NETGEAR Smart Managed Pro Switches offer powerful L2+ and Layer 3 Lite features, enhanced performance and usability. They are purposely designed for converged networks where voice, video, data are all carried on a single network platform. These switches are optimized for network efficiency, operational cost savings, and ease of management. Advanced features such as IPv4/IPv6 Layer 3 static routing, DiffServ QoS, LACP link aggregation and Spanning Tree will satisfy even the most advanced small business networks.

Smart IT, not Big IT

No need for an IT expert or a complicated user manual, just configure your network with the user-friendly NETGEAR Smart Managed Pro Web browser-based management GUI. The MS510TX and MS510TXPP are backed by NETGEAR ProSAFE Lifetime Limited Warranty and 24/7 support including lifetime chat.

Multi-Gigabit to connect any type of device to a single switch

• 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G/5G
• 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G
• 4-port RJ-45 Gigabit Ethernet 10M/100M/1G
• 1-port RJ-45 10 Gigabit Ethernet Copper (100M/1G/2.5G/5G/10GBASE-T)
• 1-port SFP+ 10 Gigabit Ethernet Fiber (1G/10GBASE-X SFP+)

MS510TXPP

• 180W PoE budget available across 8 Gigabit and Multi-Gigabit PoE+ ports (802.3at)
• Fan-speed control with max 28.8dB at 25°C (77°F) ambient

Non-blocking switching with 78Gbps line rate fabric

• Get all the connectivity you want to your devices across all 10 ports of Gigabit, Multi-Gigabit and 10 Gigabit Ethernet, without congestion and in full duplex mode

MS510TX

• No PoE version
• Fan-speed control with max 21dB at 25°C (77°F) ambient

2-port 10G uplinks (one copper port and one fiber SFP+)

• Perfect for local 10G server or for uplink and aggregation to your network core

Configurable L2 network features (VLANs, Rapid Spanning Tree, IGMP Snooping and Querier, IGMP Fast Leave…)

• Intuitive Web management streamlines initial configuration for rapid onboarding at the access layer of your network

Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling

• Simplifies management of Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices…

Advanced Smart Switching features (IPv4/IPv6 Layer 3 static routing, DiffServ QoS policies, LACP Link Aggregation, Broadcast control, Denial of service protection

• Will satisfy even the most advanced small and medium organizations