SRT10KRMXLIFeatures

APC Smart-UPS SRT 10000VA RM 230V

• 10/100 BaseT Connection
  Connect the device to a network using a 10 or 100 BaseT connection
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.

Smart-UPS On-LineFeatures & Benefits

Availability

• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Scalable runtime
  Allows additional run time to be quickly added as needed.

Marketing Features

• Save time with easy and convenient remote accessibility.
  Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
• Peace of mind that comes with full equipment compatibility and reliability of a leader
  Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
• Avoids costly power problems by keeping your IT equipment and data protected and available.
  Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
• Low operating and maintenance costs with proven reliability and intelligent battery management.
  Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Serviceability

• Predicitive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Protection

• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.

Manageability

• Network manageable
  Provides remote power management of the UPS over the network.
• Serial connectivity
  Provides management of the UPS via a serial port.
• InfraStruXure Manager Compatible
  Enables centralized management via the APC InfraStruXure Manager.
• LED status indicators
  Quickly understand unit and power status with visual indicators.
• SmartSlot
  Customize UPS capabilities with management cards.

Adaptability

• Plug-and-Play external batteries
  Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
• Rack/Tower convertible
  Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• Flash upgradeable firmware
  Install maintenance releases of firmware remotely using FTP.

Basic
Backup/Run Time (Full Load): 3 Minute
Backup/Run Time (Half Load): 12 Minute
Brand Name: APC
Form Factor: Rack-mountable
Load Capacity (VA): 10000 VA
Load Capacity (Watt): 10 kW
Product Family: Smart-UPS On-Line
Product Type: Dual Conversion Online UPS
Rack Height: 6U
Receptacles: 1 x Hard Wire 3-wire (H N + G)
3 x IEC Jumper
4 x IEC 60320 C19
6 x IEC 60320 C13
Battery Information
Backup/Run Time (Full Load): 3 Minute
Backup/Run Time (Half Load): 12 Minute
Battery Characteristics: Maintenance-free, Sealed, Spill-proof
Battery Chemistry: Sealed Lead Acid (SLA)
Hot Swappable: Yes
Maximum Battery Recharge Time: 1.50 Hour
Number of Batteries: 2
Controls/Indicators
Status Indicators: LED Indicators
Environmental Conditions
Sound Emission: 55 dB(A)
Temperature: 40°C
Thermal Dissipation: 2002 BTU/h
General Information
Brand Name: APC
Manufacturer Part Number: SRT10KRMXLI
Manufacturer Website Address: http://www.apc.com/au
Manufacturer: American Power Conversion Corp
Product Line: Smart-UPS On-Line
Product Name: Smart-UPS SRT 10000VA RM 230V
Product Type: Dual Conversion Online UPS
Interfaces/Ports
Network (RJ-45): Yes
Total Number of Expansion Slots: 1
USB: Yes
Management
Alarm: Battery Failure
Miscellaneous
Certifications & Standards:
CE
CE Mark
Environmental Certification: RoHS
Environmentally Friendly: Yes
Package Contents:
Smart-UPS SRT 10000VA RM 230V
CD with Software
Documentation CD
Installation Guide
Rack Mounting Brackets
Rack Mounting Hardware
Rails Rack Mount Bracket
Temperature Probe
USB Cable
Warranty Card
Physical Characteristics
Colour: Black
Depth: 715 mm
Form Factor: Rack-mountable
Height: 263 mm
Rack Height: 6U
Weight (Approximate): 111.82 kg
Width: 432 mm
Power Description
Circuit Breaker: Yes
Input Voltage: 230 V AC
Load Capacity (VA): 10000 VA
Load Capacity (Watt): 10 kW
Output Voltage: 230 V AC
Surge Energy Rating: 480 J
Waveform Type: Sine Wave
Technical Information
Bypass Switch: Automatic & Manual
Internal
Emergency Power OFF: Yes
Plug/Connector Type: Hard Wire 3 wire (1PH+N+G)
Hard Wire 5-wire (3PH + N + G)
Protection Type: Lightning
Spike
Surge
Receptacles: 1 x Hard Wire 3-wire (H N + G)
3 x IEC Jumper
4 x IEC 60320 C19
6 x IEC 60320 C13
Warranty
Limited Warranty: 3 Year