Thermaltake BigTyp Revo Multi Socket CPU Cooler CL-P0602
No Longer Available
- Top-down Blowing Design structure, benefit from cooling both CPU and motherboard surrounding components.
- 5 x Ø 6 mm heat-pipes direct touch CPU surface increasing heat conductivity - Support up to 160W
- Large High density Aluminum fins provides larger surface area to quickly dissipate heat
- One Powerful 12cm Fan, PWM function with 800~1,800 RPM
- Support all the latest Intel and AMD socket including LGA2011.
Top-down Blowing Design with 5 Heatpipes
- 5 x Ø 6 mm heat-pipes direct touch CPU surface increasing heat conductivity - Support up to 160W
- Top-down Blowing Design benefits from cooling both CPU and motherboard surrounding components
- Large High density Aluminum fins provides larger surface area to quickly dissipate heat
Powerful fan
- one Powerful 12cm Fan, PWM function with 800~1,800 RPM
Support Multi-socket Mounting System
- Universal socket support :
Intel: LGA2011,LGA1366, LGA1156, LGA1155, LGA775
AMD: FM1,AM3+,AM3,AM2+,AM2
CLP0602 BigTyp Revo. Installation
Intel
Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers. | Step Two: Put the two Intel mounting bars along the four long screws and secure them with the four nuts. |
Step Three: For LGA2011: Screwing the LGA 2011 screw onto motherboard tightly and put the two Intel mounting bars on the LGA 2011 screws. Fasten the four nuts onto the mounting bars tightly. | Step Four: Securing the two T-mounting bars to the base of cooler by short screws. |
Step Five: Applying a thin layer of thermal grease | Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly. |
Step Seven: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done. |
AMD
Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers. | Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts. |
Step Three: Securing the two T-mounting bars to the base of cooler by short screws. | Step Four: Applying a thin layer of thermal grease |
Step Five: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly. | Step Six: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done. |
Compatibility | Intel: LGA 2011 LGA 1366 Core i7 LGA 1155/1156/1151/1150 Core i7/Core i5/Corei3 LGA 775 Core 2 Extreme/Core 2 Quad/Core 2 Duo/ Pentium D/Pentium 4/ Pentium/ Celeron D/ Celeron AMD: FM1 / FM2 A-series AM3+ / AM3 Phenom II / Athlon II / Athlon/Sempron series AM2+ / AM2 Phenom II / Phenom / Athlon / Sempron series |
Heatsink Dimension | 148 x 130 x 105 mm |
Heatsink Material | Aluminum Fins & Aluminum Base |
Heatpipe | Ø6mm x 5pcs |
Fan Dimension | 120 x 120 x 25 mm (L x W x H) |
Rated Voltage | 12V |
Started Voltage | 5V |
Rated Current | 0.40 A |
Power Input | 4.8 W |
Fan Speed | 800-1800 RPM(PWM) |
Air Flow | 85.16 CFM |
Air Pressure | 3.25 mmAq |
Noise | 20 dBA |
Life time/Fan Life time | 30,000 Hours |
Connector | 4 pin |
Cooling Power | 160W |
Weight | 530 g |
Highlights:
* Thermal performance capable of up to 160w.
* PWM fan control function.
* Wide socket compatibility.
Features:
* Manufacturers model code: CLP0602.
* Market orientation: Cooling enthusiasts & overclockers.
* Cooler type: Top flow.
* Number of heatpipes: 5.
* Heatsink material: Aluminium (fins & base).
* Cooler height: 105mm.
* Cooler width: 130mm.
* Cooler length: 148mm.
* Intel Socket compatibility: LGA775, 1155, 1156, 1366 & 2011.
* AMD Socket compatibility: AM2, AM2+, AM3, AM3+ & FM1.
* Included fan speed: 800 to 1800RPM.
* Included fan airflow: 85.16CFM.
* Included fan noise: 20dBA.
* Included fan connector: 4Pin.
* Weight: 530g.
Would you like to know more? Check out Thermaltake's full product information page.