Socket Charging Stand For 7/700 Series Barcode Scanners Ac4076-1538
$0.00
Buy Now And Earn 0 Reward Points!
CHS Series 7 QX STAND
Highly Stylish Hands-Free Mobile Coupon Scanning for Mobile Point of Sales
The QX Stand is an accessory charging stand for the CHS Series 7 models. With the 7Qi or 7Xi barcode scanners, the QX Stand provides hands-free scanning.
The QX Stand is a charging stand for the CHS Series 7 barcode scanners. It is designed to remain secure on any flat surface where you need to maximize barcode scanning efficiency and productivity. The ingenious design incorporates a small magnet built into the top of the mounting arch that makes contact with the magnet housed on the bottom of the scanners, helping to firmly secure the scanner to the QX Stand.
Benefits
- Supports Mobile Coupons* - Customers can scan their mobile coupons to redeem merchandise or present electronic coupons and tickets by passing their mobile devices under the barcode scanner.
- Quick Release* - The QX Stands' quick release mechanism facilitates a seamless transition between Stand Mode and Mobile Mode.
- Customers keep control of their devices* - The QX Stand will enable customers to securely scan mobile coupons without relinquishing control of their mobile devices.
- Charging - The QX Stand contains contacts designed to match the CHS Series 7 scanners charging pins enabling the scanner to charge & operate under AC power when mounted in the QX Stand. An LED indicates power connection. An AC adapter with a USB cable is included.
- Elegant & Functional - The QX Stands' design was carefully chosen to match the CHS ?Series 7 scanner style of form and function.
- Secure mounting - The QX Stands' robust design is specifically engineered for secure mounting of the CHS scanner. A magnet embedded in the QX Stand guides the CHS Series 7 scanner into alignment and holds it in place.
- Stationary with a twist - The QX Stands' docking arch is mounted using a gimbal & socket to allow a 360 degree rotation and 3D tilt.
- The Scanner Knows* - The QX Stands' detection pins lets the scanner know it is mounted on a QX Stand. This facilitates a dynamic user environment when moving the scanner from the QX Stand to the hand.
- Smart SDK* - With the SDK your App can configure the CHS 7Qi and 7Xi scanner to generate a good scan LED, beep tone, or vibrate indication when mounted in the QX Stand and with a different good scan configuration when the scanner is Mobile/in your hand. For the 7Qi and 7Xi, your App can also configure Unattended Mode.
*With 7Qi and 7Xi 2D barcode scanners only
Hardware Features
Holder:
- Built-in hook and cradle to securely hold the scanner in place
- Magnet ensures proper alignment for charging
- Audible beep (adjustable) provides confirmation when the scanner is properly seated
- Gimbal & Socket with thumb-lock screw enable 360 rotation and front/back tilt
- Lanyard can still be used with the QX Stand
Base:
- Rubber feet and a weighted base prevents sliding
- Magnets to hold the QX Stand on a metal surface
- Keyholes to screw-mount the QX Stand to a surface (optional)
Electrical:
- MicroUSB for connection to AC Adapter (included)
- QX Stand microLED indicates power connection
- Scanner LED indicates when it is fully charged (solid green)
Supported Scanner Models
Hands-free operation and AC Power/Battery Charge:
- Colorful Scanners: 7Qi
- Durable Scanners: 7Xi
AC Power/Battery Charge only:
- Colorful Scanners: 7Ci/7Mi
- Durable Scanners: 7Di/7Pi
Physical Characteristics
Dimensions:
- Stand Height: 8.75 in (222 mm)
- Holder Width: 1.80 in (46 mm)
- Holder Length: 5.50 in (140 mm)
- Base Diameter: 5.75 in (146 mm)
Total Mass:
- Without Scanner and AC Adapter: 16 oz (454 g)
- With Scanner and without AC Adapter: 17.6 oz (500 g) Antimicrobial Rating:
- JIS Z2801:2000 Test: 2.49 on MRSA 6.07 if cleaned with Sani-Cloth Plus cloth wipes
- Biosafe HM4100, EPA# 83019-1
Included Items
- QX Stand in three pieces (Holder, Base, Stem), minor assembly required
- 1 AC Adapter (international plugs available for non US and Japan countries)
- 2 Meters USB Charging Cable
Warranty
90 days
Certifications
- Complies with Part 15, FCC Rules
- RoHS: Directive 2002/9S/EC
