Cisco WAP131 Wireless-N Dual Radio Access Point with PoE WAP131-A-K9-AU

SKU
225729
Brand
Warranty
1 Year Manufacturer's return to base

No Longer Available

$239.00
Buy Now And Earn 239 Reward Points!

Improved Coverage, Easy to Deploy, Secure Business-Class Wireless-N Connectivity

Highlights

   Provides cost-effective 802.11n connectivity for 2.4-GHz and 5-GHz clients

   Single Power over Ethernet (PoE) Gigabit Ethernet for connecting to PoE switch

   PD port allows access point to be powered by backbone switch

   Works right out of the box with easy installation and simple web-based configuration and wizard

Product Overview

In today’s dynamic business environment, employees are becoming more mobile and collaborative than ever. To stay productive, they need dependable, business-class access to network applications throughout the office. The Cisco® WAP131 Wireless-N Dual Radio Access Point provides a simple, cost-effective way to extend secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.

The Cisco WAP131 Wireless-N Dual Radio Access Point uses concurrent dual-band radios for improved coverage and user capacity. The Gigabit Ethernet port allows the AP to be powered by PoE switch to help reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth-sensitive traffic for voice‑over-IP (VoIP) and video applications.

The Cisco WAP131 Wireless-N Dual Radio Access Point is easy to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. An attractive desktop design with an integrated stand allows you to place the AP on your desk vertically or horizontally.

To enhance reliability and safeguard sensitive business information, the Cisco WAP131 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1 X RADIUS authentications help keep unauthorized users out.

Figure 1 shows the front panel of the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE, and Figure 2 shows the back panel.

Figure 1.      Front Panel of Cisco WAP131 Wireless-N Dual Radio Access Point with PoE

Figure 2.      Back Panel of Cisco WAP131 Wireless-N Dual Radio Access Point with PoE

Features

   Concurrent dual-band radio support for up to 300 Mbps per radio to maximize capacity and coverage.

   Single Gigabit Ethernet LAN interface enables a high-speed uplink to the wired network.

   Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue-access-point detection, helps protect sensitive business information.

   Simple installation and intuitive web-based configuration and wizard enable fast, simple deployment and setup in minutes.

   Desktop design with integrated stand, for easy access and placement.

   Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.

   Power-saving sleep mode and port control features help maximize energy efficiency.

   Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.

   Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.

   Limited lifetime hardware warranty provides peace of mind.

RAM installed (max) 
128 MB 

Flash memory installed (max) 
128 MB 

Data transfer rate 
300 Mbps per radio 

Data link protocol 
IEEE 802.11a/b/g/n 

Frequency band 
2.4 GHz and 5 GHz 

Number of radios 
2 

Multiple input, multiple output (MIMO) 
2 x 2:2 for 2.4 Ghz and 5 GHz 

Maximum active WLAN clients 
16 per radio

Number of access points supported per cluster 
None 

Status indicators 
Power, WLAN, LAN 

Features 
DHCP support, load balancing, VLAN support, syslog support, email alert, IPv6 ,Wireless Distribution System (WDS) support, firmware upgradable, wall mountable, Spanning Tree Protocol (STP), Wi-Fi Multimedia (WMM) support, access control list (ACL) support, quality of service (QoS), RADIUS support, multiple SSID support, wireless bridge mode, IPv4 support 

Compliant standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11a/b/d/e/g/i/n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.1X 

Antenna 
4 x internal PIFA 

Gain level 
3.4 dBi max on 2.4 GHz
4.5 dBi max on 5 GHz

RAM installed (max)
128 MB

Flash memory installed (max)
128 MB

Data transfer rate
300 Mbps per radio

Data link protocol
IEEE 802.11a/b/g/n

Frequency band
2.4 GHz and 5 GHz

Number of radios
2

Multiple input, multiple output (MIMO)
2 x 2:2 for 2.4 Ghz and 5 GHz

Maximum active WLAN clients
16 per radio

Number of access points supported per cluster
None

Status indicators
Power, WLAN, LAN

Features
DHCP support, load balancing, VLAN support, syslog support, email alert, IPv6 ,Wireless Distribution System (WDS) support, firmware upgradable, wall mountable, Spanning Tree Protocol (STP), Wi-Fi Multimedia (WMM) support, access control list (ACL) support, quality of service (QoS), RADIUS support, multiple SSID support, wireless bridge mode, IPv4 support

Compliant standards
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11a/b/d/e/g/i/n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.1X

Antenna
4 x internal PIFA

Gain level
3.4 dBi max on 2.4 GHz
4.5 dBi max on 5 GHz