D-Link DGS-3620-28TC 24-Port 10/ 100/ 1000Mbps & 4-Port Combo SFP & 4-Port SFP+ (10GB) L3 Stackable
No Longer Available
QUICK OVERVIEW
The DGS-3420 Series xStack Gigabit L2+ Stackable Managed Switches consists of:
- DGS-3420-28TC: 28-Port Gigabit L2+ Stackable Managed Switch including 4 x Combo 1000BASE-T/SFP ports and 4 x 10 Gbps SFP+ ports
- DGS-3420-28PC: 28-Port Gigabit L2+ Stackable Managed PoE Switch including 4 x Combo 1000BASE-T/SFP ports and 4 x 10 Gbps SFP+ ports (24 x PoE ports)
- DGS-3420-28SC: 28-Port Gigabit SFP L2+ Stackable Managed Switch including 4 x Combo 1000BASE-T/SFP ports and 4 x 10 Gbps SFP+ ports
- DGS-3420-52T: 52-Port Gigabit L2+ Stackable Managed Switch including 4 x 10 Gbps SFP+ ports
- DGS-3420-52P: 52-Port Gigabit L2+ Stackable Managed PoE Switch including 4 x 10 Gbps SFP+ ports (48 x PoE ports)
The xStack DGS-3420 series of next generation Layer 2+ Gigabit switches delivers performance, flexibility, security, multi-layer QoS, and accessibility, along with redundant power solutions for SMBs and enterprises. With high Gigabit port densities, Gigabit SFP, 10-Gigabit SFP+ support, and advanced software solutions, these switches can act as either departmental access layer devices or aggregation switches to form a multilevel network structured with backbone and centralised high-speed servers.
Service providers can take advantage of the high SFP density switches (DGS-3420-28SC) to structure the aggregation of Fiber to the Building (FTTB) networks that are extended to the subscribers’ sites.
Unparalleled Flexibility
Easily deployed and simple to manage, the DGS-3420 can be stacked with any switch that supports D-Link’s Single IP Management to form a multi-level network structured with backbone and centralised high-speed servers. The virtual stack can include units located anywhere on the same network domain, and uses optional 10-Gigabit uplinks to move intra-stack traffic at 20 Gbps full duplex speeds.
Redundant Ring Stacking
Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 12 units or 576 Gigabit ports can be configured for a stack using direct attach cables to provide high bandwidth on the DGS-3420 Series with cost efficiency.
Security, Performance & Availability
The DGS-3420 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1X user authentication via TACACS+ and RADIUS servers.
The DGS-3420 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/L4 QoS/CoS solutions help ensure that critical network services such as VoIP, ERP, Intranet, and video conferencing are served with proper priority. The series also provides D-Link’s Safeguard Engine to increase the switch’s reliability, serviceability, and availability to prevent malicious flooding traffic caused by worms or virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for endusers. For advanced applications, flow-based bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols.
IPv6 Technology
The DGS-3420 Series also features comprehensive IPv6 support, including IPv6 Tunnel, ICMPv6, DHCPv6, RIPng, IPv4/IPv6 dual stack, and more. With 10-Gigabit connectivity and IPv6 support, the series enables you to future-proof your network for cost efficiency and longevity while meeting the requirements that future IPv6-capable network devices require.
D-Link Green Technology
D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3420 Series implements D-Link Green technology, which includes power saving through link status, smart fan design, increased heat dissipation, and cable length detection. The power-saving feature automatically powers down ports that have no link or link partner. The Smart Fan design allows the built-in fans to automatically turn on only at a certain temperature, providing continuous, reliable, and eco-friendly operation of the switch.
Number of 10/100/1000BASE-TX ports
DGS-3420-28TC - 20 ports
DGS-3420-28PC - 20 ports
DGS-3420-52T - 48 ports
DGS-3420-52P - 48 ports
Number of SFP ports
DGS-3420-28SC - 20 ports
Number of Combo 1000Base-T/SFP ports
DGS-3420-28TC - 4 ports
DGS-3420-28PC - 4 ports
DGS-3420-28SC - 4 ports
Number of SFP+ ports
DGS-3420-28TC - 4 ports
DGS-3420-28PC - 4 ports
DGS-3420-28SC - 4 ports
DGS-3420-52T - 4 ports
DGS-3420-52P - 4 ports
Optional redundant power supply
DGS-3420-28TC - DPS-500
DGS-3420-28PC - DPS-700
DGS-3420-28SC - DPS-500
DGS-3420-52T - DPS-500
DGS-3420-52P - DPS-700
RS-232 console port
Yes
Management port
10/100BASE-TX
Alarm port
Yes
SD card slot
Yes
PoE Supported Models (Standard(s)/Number of Ports/Maximum Power Budget)
DGS-3420-28PC - 802.3af/at/24 ports/370W (740W with DPS-700 RPS)
DGS-3420-52P - 802.3af/at/48 ports/370W (740W with DPS-700 RPS)
Performance
Switch Capacity
DGS-3420-28TC - 128 Gbps
DGS-3420-28PC - 128 Gbps
DGS-3420-28SC - 128 Gbps
DGS-3420-52T - 176 Gbps
DGS-3420-52P - 176 Gbps
64-Byte Packet Forwarding Rate
DGS-3420-28TC - 95.24 Mpps
DGS-3420-28PC - 95.24 Mpps
DGS-3420-28SC - 95.24 Mpps
DGS-3420-52T - 130.95 Mpps
DGS-3420-52P - 130.95 Mpps
Packet Buffer
2 MB
MAC address table
16K entries
IPv4 routing table
1K entries
IPv6 routing table
512 entries
IPv4 forwarding table
2K entries
IPv6 forwarding table
1K entries
Jumbo frame size
130000 bytes
Physical & Environmental
MTBF
DGS-3420-28TC - 287763 hours
DGS-3420-28PC - 230906 hours
DGS-3420-28SC - 300371 hours
DGS-3420-52T - 255608 hours
DGS-3420-52P - 202462 hours
Acoustics (max)
DGS-3420-28TC - 46.5 dB
DGS-3420-28PC - 52.8 dB
DGS-3420-28SC - 46.3 dB
DGS-3420-52T - 51.1 dB
DGS-3420-52P - 55.4 dB
Heat Dissipation (max)
DGS-3420-28TC - 173.2 BTU/hr
DGS-3420-28PC - 1630.0 BTU/hr
DGS-3420-28SC - 205.3 BTU/hr
DGS-3420-52T - 276.2 BTU/hr
DGS-3420-52P - 1723.4 BTU/hr
Power Input
100 to 240 VAC, 50 to 60Hz Internal Universal Power Supply
Power Consumption (max)
DGS-3420-28TC - 50.8 W
DGS-3420-28PC - 478.0 W
DGS-3420-28SC - 60.3 W
DGS-3420-52T - 81.0 W
DGS-3420-52P - 505.4 W
Dimensions (W x D x H)
DGS-3420-28TC - 441 x 310 x 44 mm
DGS-3420-28PC - 441 x 380 x 44 mm
DGS-3420-28SC - 441 x 310 x 44 mm
DGS-3420-52T - 441 x 380 x 44 mm
DGS-3420-52P - 441 x 380 x 44 mm
Weight
DGS-3420-28TC - 4.12 kg
DGS-3420-28PC - 5.75 kg
DGS-3420-28SC - 4.06 kg
DGS-3420-52T - 5.07 kg
DGS-3420-52P - 6.24 kg
Ventilation
Smart fan
Temperature
Operating: 0° to 50°C
Storage: -40° to 70°C
Operating Humidity
Operating: 10% ~ 90% Non-condensing
Storage: 5% ~ 90% Non-condensing
EMI/EMC
FCC Class A, CE Class A, VCCI Class A, IC, C-Tick
Safety
CB, cUL, LVD
Certification
IPv6 Ready Logo Phase 2
Software Feature
Stackability
Virtual Stacking Support
D-Link Single IP Management
Up to 32 devices per virtual stack
Up to 20G stacking bandwidth
Physical Stacking2
Supports Duplex Chain/Ring topology
Up to 40G stacking bandwidth
Up to 12 units per stack
L2 Features
MAC Address Table: 16K
Flow Control
802.3x Flow Control
HOL Blocking Prevention
Jumbo Frames up to 13,000 bytes
IGMP snooping
IGMP v1/v2/v3 Snooping
Supports 960 groups
Port/Host-based
IGMP Snooping Fast Leave
MLD Snooping
MLD v1/v2 Snooping
Supports 480 groups
Host-based MLD Snooping Fast Leave
Spanning Tree
802.1D-2004 STP
802.1w RSTP
802.1Q-2005 MSTP
BPDU filtering
Root Restriction
Loopback Detection
802.3ad Link Aggregation
Max. 32 groups per device
8 Gigabit ports or 2 10-Gigabit ports per group
Port Mirroring
Supports 4 Mirroring Groups
Supports One-to-One, Many-to-One, Flow-based, and RSPAN mirroring
L2 Protocol Tunneling
ERPS (Ethernet Ring Protection Switching)
VLAN
VLAN Group
Max. 4K Static VLAN Groups
Max. 255 Dynamic VLAN Groups
802.1Q Tagged VLAN
802.1v Protocol VLAN
GVRP
Double VLAN (Q-in-Q)
Port-based Q-in-Q
MAC-based VLAN
VLAN Trunking
L3 Features
256 IP interfaces
Loopback interface
IPv6 Tunneling
Proxy ARP
Gratuitous ARP
VRRP1
L3 Routing
1K routing entries shared by IPv4/v6
Max. 1K IPv4 routes
Max. 512 IPv6 routes
2K L3 forwarding entries shared by IPv4/v6
Max. 2K IPv4 entries
Max. 1K IPv6 entries
256 static routing entries for IPv4, 128 entries for IPv6
RIP v1/v2
RIPng
Policy-based Routing
Route Redistribution
QoS (Quality of Service)
802.1p Class of Service (CoS)
8 queues per port
Queue Handling
Strict
Weighted Round Robin (WRR)
Strict + WRR
CoS based on
Switch Port
VLAN
802.1p Priority Queues
MAC Address
IPv4/v6 Address
DSCP
Protocol Type
IPv6 Traffic Class
IPv6 Flow Label
TCP/UDP Port
User-defined Packet Content
Supports following actions for flows:
Remark 802.1p Priority Tag
Remark TOS/DSCP Tag
Bandwidth Control
Flow Statistics
Committed Information Rate (CIR), min. granularity 1 Kbps.
Bandwidth Control
Port-based (Ingress/Egress, min. granularity 8 Kbps)
Flow-based (Ingress, min. granularity 8 Kbps)
Time-based QoS
Congestion Control - WRED3
ACL (Access Control List)
Ingress ACL: support up to 6 profiles and 256 rules per profile
Egress ACL: support up to 4 profiles and 128 rules per profile
ACL based on
802.1p Priority
VLAN ID
MAC Address
Ether Type
IPv4/v6 Address
DSCP
Protocol Type
TCP/UDP Port Number
IPv6 Traffic Class
IPv6 Flow Label
User-defined Packet Content
ACL Statistics
Time-based ACL
Security
SSH v2
SSL v1/v2/v3
Port Security for up to 3328 MAC addresses for port/system/VLAN
Broadcast/Multicast/Unicast Storm Control
Traffic Segmentation
IP-MAC-Port Binding
ARP Packet Inspection
IP Packet Inspection
DHCP Snooping
DHCPv6 and NDP Snooping
Supports up to 500 Address Binding Entries per device
D-Link Safeguard Engine
DHCP Server Screening
CPU Interface Filtering
ARP Spoofing Prevention
BPDU Attack Protection
Secure FTP1
NetBIOS/NetBEVI Filtering
AAA
802.1X
Port-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
Web-based Access Control (WAC)
Port-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
MAC-based Access Control (MAC)
Port-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
Japan Web-based Access Control (JWAC)
Host-based Access Control
Microsoft NAP
Supports 802.1X NAP
Supports DHCP NAP
Guest VLAN
RADIUS and TACACS+ authentication for switch access
4-Level user account
Management
Web-based GUI
Command Line Interface (CLI)
Telnet Server
Telnet Client
TFTP Client
ZModem
SNMP v1/v2c/v3
SNMP Trap
System Log
RMON v1
Supports 1,2,3,9 Groups
RMON v2
Supports ProbeConfig Group
sFlow
LLDP/LLDP-MED
BootP/DHCP Client
DHCP Auto-Configuration
DHCP Relay
DHCP Relay Option 60; 61
DHCP Relay Option 82
DHCP Server
Flash File System
Multiple Images
Multiple Configurations
CPU Monitoring
Debug Command
SNTP
ICMPv6
DHCPv6 Client
DHCPv6 Relay
DHCPv6 Server
Trusted Host
MTU Setting
Microsoft® NLB Support
UDP helper
OAM
802.3ah Ethernet Link OAM
802.3ah D-Link Extension: D-Link Unidirectional Link Detection (DULD)
