D-link Dxe-820t Dual Port 10 Gigabit 10gbase-t Pcie Ethernet Adapter Dxe-820t
No Longer Available
Add 10 Gigabit connectivity to your server or high-powered workstation with the D-Link DXE-820T Dual Port 10 Gigabit Ethernet PCIe Adapter. It is a high performance network adapter which combines 10GBase-T with high-speed PCI Express 2.0 x8 interface.
Advanced Features and Security
The adapter features onboard screening of 802.1Q VLAN tagged Ethernet frames, allowing you to assign multiple subnets to each server and isolate devices within each VLAN from the rest of the network for better traffic control and security.
With support for advanced features such as 802.3x flow control, jumbo frames, and SNMP for network management, the DXE-820T can easily interoperate with your current networking equipment.
Performance and Reliability
The DXE-820T increases network throughout by utilising PCI Express bus architecture. With Smart Load Balancing™ the
DXE-820T configures multiple adapters to work as a team, sharing traffic and ensuring data reliability.
Checksum Offloading
The DXE-820T features TCP, UDP, and IP checksum offloading functionality, which transfers the checksum processing tasks from the computer’s CPU to the network card.
General
Standards
- IEEE 802.1Q VLAN tagging
- IEEE 802.3x flow control
- IEEE 802.3an 10GBASE-T
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3az Energy-Efficient Ethernet (EEE)
- IEEE 802.3ad teaming
- PCI Express x8 2.0, 5 GT/s compliant
Power
- Maximum Power Consumption: 23.38 W
- Input Voltage: 3.3 V and 12 V
Data Transfer Rate
- 1 Gbps Full Duplex
- 10 Gbps Full Duplex
- Auto mode (support 100 Mbps)
Transmit Distance
- 10GBASE-T
- 100M with Cat 6A or higher UTP
- 50M with Cat 6 UTP
- 100/1000BASE-T
- 100M with Cat 5 or higher UTP
Interface Slot
- PCI Express v2.0 x8/x16 slot
- Includes standard and low profile brackets
Supported Functions
- NIC partitioning
- Other performance features
- TCP, IP, UDP checksum
- TCP segmentation
- Adaptive interrupts
- Receive Side Scaling (RSS)
- Manageability
- Statistics for SNMP MIB II, Ethernet-like MIB, and Ethernet MIB
- SMBus controller
- IPMI support (IPMI pass thru mode)
- Advanced network features
- Jumbo frames (up to 9 KB)
- Virtual LANs
- Smart load balancing teaming
- LiveLink™ (supported in both the 32-bit and 64-bit Windows operating systems)
- Logical Link Control (IEEE Std 802.2)
- Layer-2 Priority Encoding (IEEE Std 802.1p)
- High-speed on-chip RISC processor
- Up to 3 classes of service (CoS)
- Integrated 96 KB frame buffer memory
- Quality of Service (QoS)
- Support for multicast addresses via 256 bits hashing hardware function
- JTAG support
- PCI Power Management Interface (v1.1)
- 64-bit BAR support
- iSCSI Boot support
- Virtualization
- Microsoft
- VMware
Functionality
Driver Support
- Windows Server 2008 (x86, x64)/2008 R2 (x64)
- Windows Server 2012
- RHEL 6.4/6.5 (x64), RHEL 5.9 (x64)
- SLES 11.2/11.3 (x64)
- Solaris 11/11.1
Diagnostic LED
- Speed/Link
- Activity
Physical
Dimensions
- 181 mm x 120.9 mm x 21.6 mm (7.13 x 4.76 x 0.85 inches)
Temperature
- Operating: 0 to 40 °C (32 to 104 °F)
- Storage: -20 to 70 °C (-4 to 158 °F)
Humidity
- Operating: 10% to 90% non-condensing
- Storage: 10% to 90% non-condensing
Certifications
- CE
- FCC
- C-Tick
⚫10-Gigabit Ethernet over Copper
⚫Dual Port 10GBASE-T RJ45
⚫802.1Q VLAN Tagging
⚫802.3x Flow Control
⚫Jumbo Frame Support (up to 16K bytes)
⚫TCP/UDP/IP Checksum Offloading
⚫Allows throughput at rates up to 40 Gbps
⚫Low profile bracket included
