Edimax 24-port Gigabit Switch With 2-port Sfp Rack Mount Gs-1026 V2
No Longer Available
- Supports 24 10/100/1000Mbps Gigabit Ethernet ports and 2 1000Mbps SPF slots
- Supports auto-MDI/MDIX crossover detection and auto-correction
- Supports 10/100Mbps full/half duplex modes and 1000Mbps full duplex mode
- Supports wire-speed package filtering and forwarding rates
- Supports store-and-forward architecture with fragment and CRC error package filtering
- Supports IEEE 802.3az Energy Efficient Ethernet
- Support 8K MAC address table & 9KB jumbo frame
- Designed with fan-less quite operation & 19-inch rack-mountable metal case
- Plug and play, no installation required
Built-in 2 SFP slots
The GS-1026 V2 is built in with 2 SFP slots to uplink to the server, storage, or other switch. You can make the connection by plugging in standard SFP fiber modules for long distance applications.
Supports High-Speed Networking and Jumbo Frames
The GS-1026 V2 is an excellent solution to expand your Gigabit network. With Gigabit speed, the GS-1026 V2 gives high flexibility and high bandwidth connectivity to servers, workstations and other attached devices. It enables you to save time when transferring large files. In addition, it also supports Jumbo Frames 9K to improve network utilization in large files transfer.
Plug & Play, No Installation Required
Just plug Ethernet enabled devices into the switch. Data can be transmitted through existing standard Cat-5e Ethernet cables with no additional cables or configuration required.
High Performance
The GS-1026 V2 switch also supports auto-negotiation, non-blocking wire speed, auto-MDI/MDI-X and store and forward architecture to give you the maximum speed and highest performance possible for each device connected to your network.
- Auto-Negotiation
- Non-Blocking Wire Speed
- Supports Auto-MDI/MDI-X
- Supports Store and Forward Architecture
Power Saving
Along with the Fast Ethernet speeds critical for next-generation network applications, the GS-1026 V1 offers environmental efficiency . To comply with the IEEE802.3az standard, the GS-1026 V2 provides power saving functionality to reduce energy consumption and save costs:
- Inactive Link Detection
- Cable Length Detection
Fan-less Design
Since the fan-less design provides quiet operation and helps to extend the device’s lifetime in office spaces, the GS-1026 V2 is the perfect solution for small business and SOHO office deployments.
APPLICATION DIAGRAM
HARDWARE | ||
Ports | 24 RJ-45 10/100/1000Base-T ports 2 SFP slots | |
Transmission Method | Store and forward | |
Transmission Media | 10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5 UTP/STP 1000BaseT Cat. 5e UTP/STP | |
Buttons | Reset button | |
LED Indicators | Per port: Link/Act Per unit: Power | |
Power Input | 100-240V AC, 50-60 Hz | |
Power Consumption | 24W (Max) | |
Dimensions (L x W x H) | 441 × 131 × 44 mm | |
Weight | 1.96KG | |
PERFORMANCE | ||
Switching Capacity | 48Gbps | |
MAC Address | 8K | |
Buffer Memory | 512KB | |
Jumbo Frames (Bytes) | 9K | |
Filtering/Forwarding Rates | 1000Mbps port – 1,488,000pps 100Mbps port - 148,800pps 10Mbps port - 14,880pps | |
ENVIRONMENT | ||
Temperature | Operating: 0 ~ 40℃ Storage: -40 ~ 70℃ | |
Humidity (Non-condensing) | Operating: 10 ~ 90% Storage: 5 ~ 90% | |
STANDARDS COMPLIANCE | ||
Standards | IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3ab 1000BaseT Gigabit Ethernet IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Full-duplex and flow control IEEE 802.3az Energy efficient Ethernet | |
Certifications | FCC Class A, CE |
PACKAGE CONTENTS
- GS-1026 V2 Switch
- Quick Installation Guide
- Power Cord
- Rubber Feet
- Rack-Mount Kits
HARDWARE INTERFACE
Details:
The GS-1026 is 24-port gigabit with 2 SFP slots rack-mount switch, that is designed for medium or large network environment to strengthen its network connection. Including rack-mount brackets, the 19" size switch fits into your rack cabinet. It is a superb choice to boost your network with higher performance and efficiency.
Built-in 2 SFP slots
The GS-1026 is built in with 2 SFP slots to uplink to servers, storage, or other switching You can make the connection by plugging in standard SFP fiber modules for long distance applications.
IEEE Energy Efficient Ethernet (EEE) compliance saves power up to 58%
The Switch GS-1026 offers environmental efficiency with Gigabit Ethernet speeds critical for next-generation network applications. To comply with the IEEE802.3az standard, the Switch GS-1026 provides power saving functions to reduce energy consumption to help business save cost.
Inactive link detection
The power usage adjustment feature automatically reduces power usage when any shut down network device or inactive link is detected. That is, power consumption of the switch can be adjusted according to the link status or the number of active network devices when possible.
Cable length detection
The devices equipped with this green feature can automatically detect the length of connected Ethernet cables and adjust power usage accordingly. The shorter the cable length, the less power it consumes.
Supports High-Speed Networking and Jumbo Frames
The GS-1026 is an excellent solution to expand your Gigabit network. With Gigabit speed, the GS-1026 gives high flexibility and high bandwidth connectivity to servers, workstations and other attached devices. It enables you to save time when transferring large files. In addition, it also supports Jumbo Frames 9K to improve network utilization in large files transfer.
Fan-less Design
Since the fan-less design ensures quiet operation in small office spaces, the GS-1026 is the perfect solution for small business and SOHO office deployments.
Supports Auto-Negotiation
Every port of the GS-1026 can automatically distinguish the connected network devices are running at 10Mbps, 100Mbps for Half/Full-Duplex mode and 1000Mbps for Full-Duplex mode. The GS-1026 can adjust the speed and mode accordingly.
Supports Non-Blocking Wire Speed
The GS-1026 receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port of the GS-1026 has the speed up to 2000Mbps in full-duplex mode simultaneously . This feature provides full wire speed to the connected devices and allows you to run a high speed network smoothly.
Supports Store and Forward Architecture
With the store and forward architecture filters fragment & CRC error packets, the GS-1026 can maximize network performance while minimizing the propagation of bad network packets.
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.
Specifications:
- Standards
- IEEE 802.3 10BaseT
- IEEE 802.3u 100BaseTX
- IEEE 802.3ab 1000BaseT
- IEEE 802.3z 1000BaseSX/LX
- IEEE 802.3az Energy Efficient Ethernet
- Features
- RJ-45 Ports: 24
- SFP Slots: 2
- MAC Address: 16K
- Buffer Memory: 448KB
- Jumbo Frames: 9KB
- Transmission Method: Store and Forward
- Filtering/Forwarding Rates
- 1000Mbps port – 1,488,000pps
- 100Mbps port - 148,800pps
- 10Mbps port - 14,880pps
- Transmission Media
- 10BaseT Cat. 3, 4, 5 UTP/STP
- 100BaseTX Cat. 5 UTP/STP
- 1000BaseT Cat. 5E UTP/STP
- Led Indicators
- Per Port: Link/Act
- Per Unit: Power
- Power Requirement:100~240V/AC, 50~60Hz
- Power Consumption: 16 Watts (Max)
- Dimensions: 441 × 131 × 44(L x W x H)
- Weight:1.95 kg
- Operating Temperature: 0 to 40C
- Storage Temperature: -40 to 70C
- Humidity:
- Operating10 to 90% RH (non-condensing)
- Storage: 5 to 90% RH (non-condensing)
- Certifications: FCC Class A, CE
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.