Folksafe 1-ch Mini Passive Video Balun/ Push Pin Terminal Fs-4100sr
No Longer Available
The FS-4100SR video balun is a passive (non-amplified) device that allows the transmission of real-time CCTV video signals via cost-effective Unshielded Twisted Paired (UTP) cable. Baseband (composite) signals of any type are supported. Male BNC of FS-4100SR allows connection directly to the camera or DVR. Screw-less terminal block allows tool-less connection of UTP cable output. Used in pairs, FS-4100SR eliminates costly and bulky coaxial cable, allowing live CCTV colour video signal up to 400m. FS-4100SR is also compatible with all the other FOLKSAFE passive transceiver for applications at distances up to /400m and active receivers up to 700m. The superior interference rejection and low emissions of the FS-4100SR allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The FS-4100SR has built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
Applications
- Security Monitoring System
- Multimedia Network Teaching System
- Medical Monitoring Display System
- Industrial Automation Control System
- Barking, securities, financial information display system
- Remote Network Server Monitoring
- Department Store Security
- Casino Security
- Hospitals, Airports and barks
- School Campuses
1-CH Passive Video Transceiver ( tool-less mini balun)
- Full-motion colour video signal up to 400m and monochrome (B&W) up to 600m via UTP cat5e/6
- NTSC, PAL & SECAM video format compatible
- Real-time transmission
- No power required
- Reliable tool-less UTP push-pin terminal block Tool-less installation within less than 1 minute
- Male BNC connector
- Exceptional interference rejection
- Built-in TVS (Transient Voltage Suppressors) for surge protection
- Lightning protection design Grade:III
- 50 dB crosstalk and noise immunity
- Compact size and easy installation
- ABS engineering plastic housing
Video
- Video Format
- PAL, NTSC, SECAM
- Operating Frequency
- DC to 5MHz
- Max Distance
- UTP Category 5e (24AWG) Color: 400m B&W: 600m
- Common-mode/Differential-mode
rejection
- 15 KHz to 5 MHz 60 dB typ
- Impedance
- Coax, Male BNC 75Ω unbalanced
- UTP, two push-pins terminal block 100Ω balanced
- Attenuation
- 1.5 dB typ Max
Wire Type
- Network Wiring
- One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
- Category Type
- 2 or better
- Impedance
- 100 ± 20 ohms
- DC Loop Resistance
- 18 ohms per 100m
- Differential Capacitance
- 19 pF/ft max (62 pF/m max)
Power
- No external power required
Connector
- Video input/output
- Male BNC connector
- Video input/output
- Tool-less push-pin terminal block
Protection
- Surge Protection
- renewable solid state surge protection
- Video Input
- 2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
- Video Output
- 2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Mechanical
- Housing
- ABS engineering plastic
- Body Color
- Black
- Dimensions(L*W*H)
- 35.1*16.7*18.7mm (BNC connector excluded)
- Net Weight
- 20g
Environmental
- Operating Temperature
- -20º ~ 70º C
- Relative Humidity
- 0~95% (non-condensing)
- Storage Temperature
- -40º ~ 150º C
Details:
The FS-4100SR video balun is a passive (non-amplified) device that allows the transmission of real-time CCTV video signals via cost-effective Unshielded Twisted Paired (UTP) cable. Baseband (composite) signals of any type are supported. Male BNC of FS-4100SR allows connection directly to the camera or DVR. Screw-less terminal block allows tool-less connection of UTP cable output. Used in pairs, FS-4100SR eliminates costly and bulky coaxial cable, allowing live CCTV colour video signal up to 400m. FS-4100SR is also compatible with all the other FOLKSAFE passive transceiver for applications at distances up to /400m and active receivers up to 700m. The superior interference rejection and low emissions of the FS-4100SR allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The FS-4100SR has built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
Applications
- Security Monitoring System
- Multimedia Network Teaching System
- Medical Monitoring Display System
- Industrial Automation Control System
- Barking, securities, financial information display system
- Remote Network Server Monitoring
- Department Store Security
- Casino Security
- Hospitals, Airports and barks
- School Campuses
Specifications:
Video
- Video Format
- PAL, NTSC, SECAM
- Operating Frequency
- DC to 5MHz
- Max Distance
- UTP Category 5e (24AWG) Color: 400m B&W: 600m
- Common-mode/Differential-mode rejection
- 15 KHz to 5 MHz 60 dB typ
- Impedance
- Coax, Male BNC 75Ω unbalanced
- UTP, two push-pins terminal block 100Ω balanced
- Attenuation
- 1.5 dB typ Max
Wire Type
- Network Wiring
- One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
- Category Type
- 2 or better
- Impedance
- 100 ± 20 ohms
- DC Loop Resistance
- 18 ohms per 100m
- Differential Capacitance
- 19 pF/ft max (62 pF/m max)
Power
- No external power required
Connector
- Video input/output
- Male BNC connector
- Video input/output
- Tool-less push-pin terminal block
Protection
- Surge Protection
- renewable solid state surge protection
- Video Input
- 2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
- Video Output
- 2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Mechanical
- Housing
- ABS engineering plastic
- Body Color
- Black
- Dimensions(L*W*H)
- 35.1*16.7*18.7mm (BNC connector excluded)
- Net Weight
- 20g
Environmental
- Operating Temperature
- -20º ~ 70º C
- Relative Humidity
- 0~95% (non-condensing)
- Storage Temperature
- -40º ~ 150º C