Hp 2530-48-poe+ Switch J9778a 190417

SKU
190417
Brand
Warranty
Standard Manufacturer's Warranty

No Longer Available

$0.00
Buy Now And Earn 0 Reward Points!

The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Limited Lifetime Warranty 2.0 with 3 years 24x7 phone support.

The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Features
Cost-Effective, Reliable and Secure Access Layer Switches
The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments.
Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Limited Lifetime Warranty 2.0 with 3 years 24x7 phone support.
Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks.
Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
Limited Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.
Security and Quality of Service
The HP 2530 Switch Series supports flexible authentication methods including Local MAC Authentication, 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication.
Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS.
Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Defend your IPv6 network with DHCPv6 Protection.
Simple Deployment and Management
The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports.
Quiet operation with fanless and variable speed fan models.
Flexible deployment with wall, table, and rack mounting options.
TR-069 delivers zero touch deployment for devices with dynamic IP addresses and on private networks.
Single View of the Network
The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
Brand
HP
Series
2530
Model
2530-48-PoE+ (J9778A#ABA)

Spec
Format
Rackmount
Network Management Type
Managed
Primary Ports
48 RJ-45 autosensing 10/100 PoE+ ports
2 autosensing 10/100/1000 ports
Primary Port Speed
10/100Mbps

Details
Uplink Ports
2
Uplink Interface
SFP
Uplink Speed
10/100/1000 Mbps

Spec
MAC Address Table
16K
PoE
Yes
Power
AC voltage: 100 - 127 / 200 - 240 VAC
Current: 5.2/2.6A

Maximum power rating: 441W
Idle power: 37.5W
PoE power: 382W
Dimensions
1.75" x 17.4" x 12.7" (H x W x D)
Weight
10.1lbs
Temperature
Operating temperature 32?F to 113?F (0?C to 45?C)
Nonoperating/Storage temperature -40?F to 158?F (-40?C to 70?C)
Humidity
Operating relative humidity 15% to 95% @ 104?F (40?C), noncondensing
Nonoperating/Storage relative humidity 15% to 90% @ 149?F (65?C), noncondensing

Features
Features
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated

Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting

IPv6 Ready Certified

100 Mb Latency: < 6.6 µs (LIFO 64-byte packets)
1000 Mb Latency: < 2.2 µs (LIFO 64-byte packets)
Throughput: up to 13 million pps (64-byte packets)
Switching capacity: 17.6 Gb/s

Marketing TextThe HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches that deliver cost-effective, reliable, secure, and easy-to-use connectivity to business networks.
PI DateDec 2013
Brand NameHP
Manufacturer Web Sitehttp://www.hp.com
Form Factor1U
Product Model2530-48-PoE+
Product TypeEthernet Switch
Switching Fabric17.6Gbps
Forwarding Rate13Mpps
Packet Buffer3MB
Mac Address16Kentries
Jumbo Frame Size9220Bytes
Expansion Ports2XSFP
Fast Ethernet PortYes
Gigabit Ethernet PortYes
No. of Ports48
Type10/100
Console Ports1
Other Ports2 x 10/100/1000
Output Power441Watt
Input Voltage100-127 / 200-240V AC
Depth (mm)322.6
Height (mm)44.5
Width (mm)442.0
Weight (Kg)4.6
Layer Support2
Management TypeManaged
Management Features* IMC - Intelligent Management Center
* command-line interface
* Web browser
* configuration menu
* out-of-band management (serial RS-232C or Micro USB)
* IEEE 802.3 Ethernet MIB
* Repeater MIB
* Ethernet Interface MIB
Memory256MB
Network Technology10/100
PoE EnabledYes
VLAN* VLANs provides support for 512 VLANs and 4,094 VLAN IDs
* GARP VLAN Registration Protocol allows automatic learning and dynamic assignment of VLANs
* Voice VLAN uses LLDP-MED to automatically configure a VLAN for IP phones
Security Features* Access control lists (ACLs) accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port
* Port security allows access only to specified MAC addresses, which can be learned or specified by the administrator
* Custom banner displays security policy when users log in to the switch
Quality of Service (QoS)* Traffic prioritization (IEEE 802.1p) allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
* Simplified QoS configuration
* Port-based prioritize traffic by specifying a port and priority level
Diagnostics LED* Front-panel LEDs
* Locator LED allows users to set the locator LED on a specific switch to either turn on, blink, or turn off; simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
* Per-port LEDs provides an at-a-glance view of status, activity, speed, and full-duplex operation
Other Features* Cost-effective, reliable, and secure fully managed Layer 2 switches
* PoE+ models for voice, video, and wireless deployments
* ACLs, EEE, and IPv4/IPv6 host support