Kingston 4GB (1x4GB) DDR4 SODIMM 2133MHz CL15 1.2V Unbuffered ValueRAM Single Stick Notebook Memory
No Longer Available
QUICK OVERVIEW
Kingston 4GB 260-Pin DDR4 SO-DIMM DDR4 2133 (PC4 17000) Laptop Memory
Make everything you do on your laptop faster and more efficient than ever before with the Kingston ValueRAM DDR4 Laptop Memory (model # KVR21S15S8/4). This memory module delivers higher frequency and greater bandwidth than DDR3 memory, ensuring smooth, lag-free response even when you are launching data-intensive applications. Required only 1.2V, it consumes less power and generates less heat. It is the perfect memory solution to extend your laptop's battery life and enhance the stability.
The 260-pin SODIMM DDR4 memory module is based on eight 512M x 8-bit FBGA components and uses gold contact fingers. It’s rigorously tested to ensure quality and reliability.
Key Features
- The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V.
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB height:1.18” (30.00mm)
- RoHS compliant and Halogen-free
Product Technical Specification
| SKU | KVR21S15S8/4 |
| EAN/UPC Code | 740617248586 |
| Brand | Kingston |
| Capacity | 4GB |
| CASLatency | CL15 |
| Chip Organization | x8 |
| Data Width | X64 |
| Form Factor | DDR4 |
| Memory Depth | 512M |
| Memory Type | Non-ECC |
| Memory Voltage | 1.2v |
| Module Type | SODIMM |
| Pins | 288 Pin |
| Rank | 1R (Single Rank) |
| Speed | 2133MHz (PC4-17000) |
| Warranty | Lifetime |
Product Spec
• Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free
