Kingston 8GB (1x8GB) DDR31600MHz CL11 1.5V DIMM ECC Registered ValueRAM Single Stick Intel Validated

SKU
232303
Brand
Warranty
1 Year Manufacturer's return to base

No Longer Available

$148.00
Buy Now And Earn 148 Reward Points!

QUICK OVERVIEW

KVR16R11S4/8I

KVR16R11S4/8I
8GB 1Rx4 1G x 72-Bit PC3-12800
CL11 Registered w/Parity 240-Pin DIMM
DESCRIPTION
This document describes ValueRAM's 1G x 72-bit (8GB) DDR3-
1600 CL11 SDRAM (Synchronous DRAM), registered w/parity,
1Rx4 ECC, Intel® Compatibility Tested, memory module, based
on eighteen 1G x 4-bit FBGA components. The SPD is programmed
to JEDEC standard latency DDR3-1600 timing of 11-
11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.
The electrical and mechanical specifications are as follows:
FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• On-DIMM thermal sensor (Grade B)
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double sided component

SPECIFICATIONS
CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 35ns (min.)
Maximum Operating Power 5.196 W*
UL Rating 94 V - 0
Operating Temperature 0o
C to 85o
C
Storage Temperature -55o C to +100o
C