Kingston 8gb (1x8gb) Ddr4 Udimm 2666mhz Cl19 1.2v Unbuffered Valueram Single Stick Desktop Pc Memory
SKU
265630
Brand
Warranty
Standard Manufacturer's Warranty
No Longer Available
$49.00
Buy Now And Earn 49 Reward Points!
QUICK OVERVIEW
KVR26N19S8/ 8
Kingston's 8GB 2666MHz DDR4 Non ECC CL19 DIMM KVR26N19S8/8 RAM Memory upgrade is the quickest, easiest and most cost effective way to boost performance from your compatible device. Kingston's KVR26N19S8/8 memory upgrade offers extreme reliablility combined with performance, so it's ideal for those looking for the most reliable memory in the industry to give your system the performance it needs. High quality memory increases productivity and the Kingston 8GB 2666MHz DDR4 Non ECC CL19 DIMM memory module will not disappoint. More speed and ability to work with more programs at once will be the main gains when increasing your memory which will lead to a much more enjoyable computing experience.
Kingston has been manufacfturing high quality memory since 1987 and the cornerstone of Kingston's reputation is its reliability. Kingston gains it's respect as one of the most reliable memory manufacturer in the industry due to its testing process of memory and the 8GB 2666MHz DDR4 Non ECC CL19 DIMM memory is no different.
Product Technical Specification
SKU | KVR26N19S8/8 |
EAN/UPC Code | 740617270907 |
Memory Capacity | 8GB |
Model/Series/Type | ValueRAM |
Brand | Kingston |
CASLatency | CL19 |
Chip Organization | x8 |
Country of Origin | China, Taiwan |
Form Factor | DDR4 |
Memory Depth | 1G |
Memory Voltage | 1.2v |
Module Type | DIMM |
Operating Temperature | 0°C to 85°C |
Pins | 288 Pin |
Product Type/Family | DRAM |
RAM Memory Type | Non-ECC |
Rank | 1R (Single Rank) |
Speed | 2666MHz (PC4-21300) |
Warranty | Lifetime |
Weight | 9g |
Kingston 8GB (1x8GB) DDR4 UDIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Desktop PC Memory
This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
• Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
• Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free