LENOVO S3510 480G ENTERPRISE ENTRY SATA G3HS 2.5" SSD 00WG630
No Longer Available
Abstract
The Intel S3510 Enterprise Entry SATA solid-state drives (SSDs) use 16nm Intel NAND flash memory technology with a SATA 6Gbps interface to provide an affordable storage solution in either 2.5-inch or 3.5-inch drive form factor.
This product guide provides essential presales information to understand the S3510 SSD offerings, their key features and specifications, components and options, and configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about S3510 SSDs and consider their use in IT solutions.
Change History
Changes in the September 13 update:
- Added new internal (non-hot-swap) drives for ThinkServer
- Added ThinkServer RS160 to the Server support - ThinkServer section
- Correction: ThinkServer drives are internal and are non-hot-swap
Introduction
The S3510 Enterprise Entry SATA solid-state drives (SSDs) for System x, ThinkServer and Flex System use 16 nm Intel NAND flash memory technology with a SATA 6Gbps interface to provide an affordable solution with industry leading performance. Compared with the Intel S3500 series, these new drives offer increased performance in terms of sequential bandwidth and random I/O operations per second (IOPS). The S3510 SSDs are optimized for read-intensive applications such as boot, web servers, lower data rate operational databases and analytics.
The S3510 is shown in the following figure.
Figure 1. Intel S3510 Enterprise Entry SATA SSD in a 2.5-inch hot-swap form factor
Did you know?
By combining the latest 16 nm MLC NAND flash memory technology with Intel’s latest controller technology, the design of the S3510 Enterprise Entry SATA SSDs delivers consistent performance, reduced power consumption, and end-to-end data protection, as well as being optimized for IOPS/watt and cost/IOPS.
Rigorous testing of S3510 Enterprise Entry SATA SSDs by Lenovo through the ServerProven® program assures a high degree of storage subsystem compatibility and reliability. Providing additional peace of mind, these drives are covered under Lenovo warranty.
Part number information
The following table lists the information for ordering part numbers and feature codes.
Battery Information | |
---|---|
Hot Swappable: | Yes |
Drive Performance | |
---|---|
Maximum Read Transfer Rate: | 500 MB/s |
Maximum Write Transfer Rate: | 460 MB/s |
Drivetrain | |
---|---|
Drive Type: | Internal |
General Information | |
---|---|
Brand Name: | Lenovo |
Manufacturer Part Number: | 00WG630 |
Manufacturer Website Address: | http://www3.lenovo.com/au/en |
Manufacturer: | Lenovo Group Limited |
Product Name: | S3510 480GB Enterprise Entry SATA G3HS 2.5" SSD |
Product Series: | S3510 |
Product Type: | Solid State Drive |
Interfaces/Ports | |
---|---|
Drive Interface Standard: | SATA/600 |
Drive Interface: | SATA |
Miscellaneous | |
---|---|
Compatibility: | Flex System x240 M5 Compute Node (9532) Server |
Device Supported: | Server |
Physical Characteristics | |
---|---|
Drive Type: | Internal |
Drive Width: | 2.5" |
Hot Swappable: | Yes |
Product Information | |
---|---|
Compatibility: | Flex System x240 M5 Compute Node (9532) Server |
Device Supported: | Server |
Drive Type: | Internal |
Storage Capacity: | 480 GB |
Storage | |
---|---|
Storage Capacity: | 480 GB |
Technical Information | |
---|---|
Device Supported: | Server |
Drive Type: | Internal |
Encryption Standard: | 256-bit |
Hot Swappable: | Yes |
Storage Capacity: | 480 GB |
Lenovo S3510 480GB G3HS 2.5in Enterprise Entry SATA SSD