Netgear M4300-52g-poe+ 48-port Fully Managed Stackable Layer 3 Poe+ Switch (48 X 1g Ports With 2
No Longer Available
QUICK OVERVIEW
The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.
Best-in-class stacking
-
M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
-
High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
Higher flexibility
-
Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
-
10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
Lower complexity
-
Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
-
DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Investment protection
-
Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
-
Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
Secure services
-
With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
-
With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
Industry standard management
-
Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
-
Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support
Industry leading warranty
-
NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
-
90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement
Key features:
Cost effective 1G access layer in campus LAN networks, and high performance 10G distribution layer for midsize organizations networks
Advanced Layer 2, Layer 3 and Layer 4 feature set - no license required - including Policy Based Routing, RIP, VRRP, OSPF and PIM
Innovative mixed "Spine and Leaf", 1G and 10G stacking with nonstop forwarding and hitless failover redundancy
Low acoustics, half-width 16-port and 24-port 10G models can be paired in a single rack space for redundant Top of Rack
Up to 384 (Gigabit) ports, or 384 (10 Gigabit) ports, or a combination of both in a single logical switch
PoE+ (30 watts per port) with hot swap, redundant power supplies and full provisioning
48-port 10G models ultra-low latency and scalable table size with 128K MAC, 8K ARP/NDP, 4K VLANs, 12K routes
Mixed Stack of 1G and 10G models provides 16K MAC, 2K ARP/NDP, 4K VLANs and 512 routes
SDN-Ready OpenFlow 1.3 support for maximum investment protection
Software:
Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritization
Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channeling
Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
Comprehensive IPv4/IPv6 static and dynamic routing including Proxy ARP, OSPF, Policy-based routing and automatic 6-to-4 tunneling
Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 ASM and SSM Proxy and Control Packet Flooding protection
High performance IPv4/IPv6 multicast routing with PIM timer accuracy and unhandled PIM (S,G,rpt) state machine events transitioning
Advanced IPv4/IPv6 security implementation including malicious code detection, DHCP Snooping, IP Source Guard protection and DoS attacks mitigation
Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimization
Availability:
Dual redundant, modular power supplies equipping full width models contribute to business continuity management
Vertical or horizontal flexible stacking with management unit hitless failover and nonstop forwarding across operational stack members
Spine and leaf architecture with every leaf switch (1G access switches) connecting to every spine switch (distributed 10G "core" switches)
Stacking and distributed link aggregation allow for multi-resiliency with zero downtime and load balancing capabilities
Link Dependency new feature enables or disables ports based on the link state of different ports
Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP) offer interoperability with PVST+ infrastructures
Management:
DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
Service port for out-of-band Ethernet management (OOB)
Standard RS232 straight-through serial RJ45 and Mini-USB ports for local management console
Standard USB port for local storage, logs, configuration or image files
Dual firmware image and configuration file for updates with minimum service interruption
Industry standard command line interface (CLI) for IT admins used to other vendors commands
Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface
Single-pane-of-glass NMS300 management platform with mass-configuration support
NETGEAR Warranty
This product is backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty.
Lifetime Next Business Day Hardware Replacement. Click here for coverage, availability and terms and conditions.
ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.
ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues).
| General Information | |
|---|---|
| Brand Name: | Netgear |
| Manufacturer Part Number: | GSM4352PB-100AJS |
| Manufacturer Website Address: | http://www.netgear.com.au |
| Manufacturer: | Netgear, Inc |
| Marketing Text: | ProSAFE M4300 Stackable L3 Managed Switch Series comes with 10G and 1G models in a variety of form factors and PoE+ full provisioning. SDN-ready with OpenFlow 1.3, M4300 Switch Series delivers IPv4/IPv6 rich services for mid-enterprise edge and SMB core with mixed stacking between 10 Gigabit and 1 Gigabit models. |
| Product Model: | M4300-52G-PoE+ |
| Product Name: | 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1,000W PSU) |
| Product Series: | M4300 |
| Product Type: | Layer 3 Switch |
| I/O Expansions | |
|---|---|
| Expansion Slot Type: | SFP+ |
| Number of SFP+ Slots: | 2 |
| Number of Total Expansion Slots: | 2 |
| Shared SFP Slot: | No |
| Management & Protocols | |
|---|---|
| Manageable: | Yes |
| Network & Communication | |
|---|---|
| Layer Supported: | 3 |
| Physical Characteristics | |
|---|---|
| Compatible Rack Unit: | 1U |
| Depth: | 388.1 mm |
| Form Factor: | Desktop |
| Rack-mountable | |
| Height: | 43.9 mm |
| Weight (Approximate): | 6.55 kg |
| Width: | 439.9 mm |
| Power Description | |
|---|---|
| Power Source: | Power Supply |
| Redundant Power Supply Supported: | Yes |
