4G WiFi M2M Router
The NetComm Wireless 4G WiFi M2M Router utilises the speed and performance capabilities of a LTE/4G network to deliver seamless M2M connectivity for a broad range of M2M applications. The NTC-140W features two Gigabit Ethernet ports and high speed WiFi connectivity making it an ideal device for high speed networking. The device also features vehicle voltage support, GPS and Ignition input making it ideal for mobile assets and transportation applications.
The NTC-140W creates point-to-point and point-to-multi-point communication enabling the secure collection and analysis of data from remote and unmanned applications.
The NTC-140W’s powerful processor delivers optimal performance and its embedded NetComm Linux OS and Software Development Kit (SDK) offers the end user the capability to install custom firmware to the on-board flash memory via the programming interface. Built in VPN clients also ensure a secure connection over a public mobile network.



High Bandwidth 4G
With an embedded 4G modem providing high speed cellular connectivity, this device is perfect for applications that require higher bandwidth and faster throughput speeds. With global connectivity, this device is ideal for applications where large volumes of data and media is being sent and received and where real time content is being accessed.

Complete connectivity
A complete range of networking and connectivity options are available with this router. Two Gigabit Ethernet ports (LAN + WAN/LAN) provide a high speed wired connection, the built-in WiFi access point can connect wireless clients and the multi-purpose I/O port can be used to attach sensors and other peripherals to the network. In addition, the integrated GPS receiver enables users to perform location based tracking and monitoring.



Ignite your devices
The NTC-140W can be configured and setup to start and shutdown at the same time as an ignition for vehicular applications. It has also passed vibration and shock test to ensure it is suitable for vehicular applications

Industrial features
As you would expect, this router comes with a host of industrial features that enable advanced usage over a long period of time. Features such as an open Linux OS with a software development kit (SDK), VPN support and TR-069 for remote management and monitoring give the user complete power over the device. A configurable power save mode and a polycarbonate housing with multiple mounting options ensure this device can be used in all industrial applications.
Technical Specifications
PROCESSOR & STORAGE
Powerful 720Mhz ARM Cortex A8 processor with 128MByte DDR2 RAM

256MByte Flash memory storage (~120MB available on board space for user storage)

microSD card slot for expandable storage    

OPERATING SYSTEM
Embedded Linux & Software Development Kit (SDK)

PEAK DATA SPEED
LTE: Category 3

100 Mbps / 50 Mbps (Downlink/Uplink) (20Mhz bandwidth)
50 Mbps / 25 Mbps (Downlink/Uplink) (10Mhz bandwidth)
HSPA+:

42 Mbps downlink (Category 24)
5.76 Mbps uplink (Category 6)
EDGE:

236 kbps throughput
CDMA 1xEV-DO Rev. A: (NTC-140W-01 only)

3.1 Mbps (forward channel)
1.8 Mbps (reverse channel)
CDMA 1x: (NTC-140W-01 only)

153 kbps (forward channel)
153 kbps (reverse channel)
14.4 kbps (circuit-switched data bearers)
CELLULAR BANDS
NTC-140W-01
LTE:
Band 2 (1900MHz)
Band 4 (AWS) (1700 / 2100MHz)
Band 5 (850MHz)
Band 13 (700MHz)
Band 17 (700MHz)
Band 25 (1900MHz G Block)

CDMA (EVDO Release 0 and EVDO Release A):
BC0 (Cellular 800MHz)
BC1 (PCS 1900MHz)
BC10 (Secondary 800MHz)

UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:

Band 1 (2100 MHz)

Band 2 (1900 MHz)
Band 4 (AWS 1700/2100MHz)

Band 5 (850 MHz)

Band 8 (900 MHz)
GSM/GPRS/EDGE:
GSM 850 (850 MHz)

EGSM 900 (900 MHz)

DCS 1800 (1800 MHz)

PCS 1900 (1900 MHz)
GNSS:
GPS: 1575.42 MHz

GLONASS: 1602 MHz
NTC-140W-02
LTE:

Band 1 (2100 MHz)

Band 3 (1800 MHz)

Band 7 (2600 MHz)

Band 8 (900 MHz)

Band 20 (800 MHz)
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:
Band 1 (2100 MHz)

Band 2 (1900 MHz)

Band 5 (850 MHz)
Band 8 (900 MHz)
GSM/GPRS/EDGE:
GSM 850 (850 MHz)

EGSM 900 (900 MHz)

DCS 1800 (1800 MHz)

PCS 1900 (1900 MHz)
GNSS:
GPS: 1575.42 MHz

GLONASS: 1602 MHz
CONNECTIVITY
2 x 10/100/1000 Base-T Ethernet RJ45 ports with Auto MDIX

Micro USB 2.0 OTG interface with 0.5A supply capability

1 x multipurpose I/O pin  
SIM CARD READER
Lockable Tray Reader with Push-Button-to-Release

Supports Mini USIM/SIM Format (2FF)  
RESET BUTTON
Reset button (recessed, requiring pen/paperclip) with three functions: Reboot, reboot into recovery mode, and reset unit to factory defaults 
ANTENNA CONNECTORS
2x SMA connectors for 3G/4G 

2x Reverse SMA connectors for Wireless LAN (MIMO)

1x SMA connector for GPS 

LED INDICATORS
Tri-colour (Red/Amber/Green) LEDs. Power, WLAN, Mobile Broadband, Service Type and Signal Strength indicators

Easy and clear LED status display for connection status, connected network type, and connection errors  
CELLULAR
Profile managed packet data connections

NAT Disable for framed route configuration

Transparent bridge mode using PPPoE to allow the router to transparently forward Public WAN IP address to a downstream device

SIM Security Management (PIN configuration, enable and disable)

Automatic and manual cellular band selection

Automatic and manual operator selection  
GPS
Embedded GPS receiver (1575.42Mhz)

SMA Connector for external passive or active GPS Antenna

Active antenna voltage: 3.05V

Maximum current: 50mA

Tracking sensitivity under open sky: -161dBm

Acquisition sensitivity under open sky: -145dBm

Cold start sensitivity: -145dBm

Time to first fix (TTFF): Cold 32s, Warm 29s, Hot 1s  
WIFI/WLAN
High throughput and extended range 802.11n 2T2R WiFi with transmission speeds up to 300Mbps

NETWORK & ROUTING
Static Routing, RIP (v1/v2), Port Forwarding and DMZ

Dynamic DNS

VRRP for redundant router failover

DHCP Server, including :   

Address reservation by MAC address

Custom DNS server definitions

DHCP Relay

DHCP list display in Web-UI

Advanced DHCP Option configuration (Option 42 NTP, Option 66 TFTP, Option 150, Option 160)
Data Stream Manager providing ability to create mappings between input and output ports (e.g. Serial Port, SMS, GPS, USB) and perform required translation or data processing by each virtual tunnel.

Modbus Server TCP/IP Gateway and Client TCP/IP Agent with up to 247 slaves connected to the Serial TCP/IP Gateway.

Modbus RTU/ASCII frames support. 
VPN
PPTP Client for VPN connectivity to remote PPTP VPN Server

IPSec tunnel termination (for up to 5 tunnels)

GRE Tunnelling

OpenVPN (Client, Server and P2P)
ADMINISTRATION & CONFIGURATION
Web-based User Interface (HTTP/HTTPS) for full device status and configuration

Password protected configuration file backup and restore for quick device configuration and device cloning

Telnet Command Line Interface for status monitoring, configuration and control

SNMP v1/v2 including cellular specific MIB, config and firmware download

TR-069 Client for remote device configuration, configuration backup and restore, and firmware upgrade

SMS Client (Send/Receive) including inbox, outbox

Ping monitor watchdog (Reset connection on repeated ping failure)

Diagnostic Log Viewer (remote and local)

System Status and Security Logs

NTP Server Support for network time sync of device’s system clock

Device User Guide stored on the device and accessible via the Web-based User Interface (HTTP/HTTPS)

Advanced Diagnostics and Control via SMS  

Query status information – such as Signal Strength, WAN IP, Uptime and many more

Configure device remotely via SMS – such as APN, authentication settings, and many more

Execute commands via SMS – such as reboot, reset to defaults, go offline, and many more

Secure SMS management using sender whitelisting and password management

SMS acknowledgement replies for queries and commands
FIRMWARE MANAGEMENT
Firmware Upgrade locally via LAN or remotely Over-The-Air (HTTP/HTTPS, SNMP, TR-069)

Multiple firmware image storage on device and dynamic install

Triggered firmware upgrade via SMS (initiate download & install from HTTP/HTTPS)  
SOFTWARE DEVELOPMENT KIT
Develop and install custom software applications

Open Linux standard development environment

Develop applications/scripting in standard ANSI C/Shell script and LUA

Package manager built into Web-UI for Application installation/removal

API (C, LUA and Shell libraries) to the unit’s internal Runtime Database to allow full status monitoring configuration and control of the device from custom applications

TEMPERATURE
Module Manufacturer’s Recommended Operating Temperature: -40ºC to +85ºC

Storage Temperature: -40°C to +85°C

POWER SUPPLY
Power input and I/O via 4 way Molex mini-fit connector

DC Power (8 - 40V DC)

1x dedicated ignition input on 4 way connector

Minimum power input rating of 6W via 4 way mini-fit connector. Recommended power input 12V 1.5A.

Vehicle compatible protection on DC Input Jack. (ISO7637 standard)
AC Power Supply available as optional accessory
DIMENSIONS & WEIGHT
Device dimensions (excluding external antenna):143mm (L) x 107mm (W) x 34mm (D) / ~235g  
MOUNTING OPTIONS
Wall mount support in multiple orientations via embedded mounting holes

DIN Rail mount support via plastic bracket included in box (Top hat section rail TH 35 IEC60715)   
CERTIFICATIONS
NTC-140W-01
FCC (USA)
IC (Canada)
PTCRB (USA)
RoHS
WEEE
ISO7637
NTC-140W-02
CE (Europe)
RCM (Australia)
E-Mark (Europe)
TRA (UAE)
iDA (Singapore)
CITC (Saudi Arabia)
RoHS
WEEE
CARRIER APPROVALS
NTC-140W-01
AT&T (NTC-140W-01-ATT)
Verizon (NTC-140W-01-VZW)*
Sprint (NTC-140W-01-SPT)*
* In progress
NTC-140W-02
Telstra
STC
?