Netgear Wn370-10000s 5pt 11n Wifi Wall Mount Access Point (for Wc7600 Only)
No Longer Available
Small form factor and inconspicuous appearance
The aesthetically pleasing design of the WN370 allows the access point to blend
nicely in the hotel room and school dormitories. WN370 provides wired access
directly to the users, where the traditional form factor Access Points are
normally installed on the ceiling, away from the access of the users that need
wired connectivity. The WN370 is installed with easy attachment to the junction
box and appears with a nice decorative appearance.
Fast installation and PoE powered
The WN370 can be installed easily and less than 5 minutes. The WN370 ships with
mounting brackets and fits into both US and EU standard electric junction boxes.
Only 4 screws are needed to reliably install the WN370 to the wall with low
protrusion. The WN370 is powered via Power over Ethernet on the 1 Gbps uplink.
Simply connect a Ethernet cable between the WN370 and a PoE enabled switch and
the WN370 is up and running. There is no separate power cord needed.
Flexible and easy deployment
WN370 can be installed easily and does not need sophisticated skills of
engineers. WN370s are generally deployed in room, especially effective in areas
where deploying the access points in traditional locations (such as ceiling
mounted or hallways of dormitories and hotels) are not feasible. Because the
WN370 is designed to provide coverage in a specific room, where the RF
containment is more well defined, no extensive site survey is required. Finally,
because the WN370 comes with four Ethernet ports, users can plug in multiple
wired devices without the requirement to pull additional cables from the access
point to the wiring closet, thereby saving both time and money to meet the
requirements of multiple Ethernet ports per room
Centrally managed with complete enterprise features
The WN370 is centrally managed by the WC7600 Wireless Controller. All of the
configurations can be centrally configured and stored at the WC7600. Once the
WN370 is discovered by the WC7600, it will receive the latest firmware and the
updated configuration provided by the WC7600. The WC7600 will automatically and
dynamically adjust the RF frequency and the output power of the WN370 to ensure
optimal frequency reuse and the best power setting to provide ubiquitous
coverage of the intended location. Comprehensive site survey is generally not
needed, thereby making the installation and wireless design of WN370 as simple
as it gets.
Product Number WN370Product Thumbnail Physical CharacteristicsPowerPower over
Ethernet
Physical DimensionsDimensions (L x W x H): 135.2 x 93.1 x 25.9 mm (5.46 x 3.80 x
1.16 in)
Weight0.218 kg, 0.481 lb
MountingWall mounting to Electric Junction Box
CaseSupport US and UN electric junction boxes
Designed to fit in standard US style electrical junction box of NEMA-WD6 and
standard EU or china style electrical junction box of BS4662
Interfaces and IndicatorsPhysical InterfacesUplink: 1 x 10/100/1000 Mbps (PoE) +
1 10/100 voice port
Downlink: 4 x 10/100Mbps (data) + 1 10/100 Mbps (voice passthrough)
PoE802.3af Power over Ethernet (PoE)
LEDs3: Power, Status, WLAN
Default Reset Environmental ConditionsOperating Temperature32? to 113? F (0? to
45? C)
Storage Temperature-4? to 158? F (-20? to 70? C)
Operating Relative Humidity10% to 90%
Storage Humidity5% to 95%
MTBF@ 25? C > 375,000 hours
@ 50? C >125,000 hours
Typical Power Consumption5.1 Watts
RF CharacteristicsStandardsIEEE 802.11n 2.0 specification
IEEE 802.11g
IEEE 802.11b
Frequency Band2.4GHz
802.11n Transmit x Receive2x2
Maximum Theoretical Throughput300 Mbps
Antenna TypeInternal
Antenna Gain3 dbi
Maximum Transmit Power21 dBm @ 802.11b (1Mbps)
21 dBm @ 802.11g (6 Mbps)
21 dBm @ 802.11n (MCS0)
Minimum RX SensitivityUp to -92 dBm
Network ManagementDeployment options - controller managedWeb UI
CLI
Support with WC7600
SNMPSNMP v1, v2 with 802.11 standard and proprietary MIBs
FeaturesWireless SecurityWEP, WPA, WPA2, 802.1x
Advances Wireless FeaturesIEEE 802.1x Radius (EAP TLS, TTLS, PEAP)
Wireless access control to identify authorized wireless devices
MAC ACL
Rogue AP detection
Heat Map
Guest Access and Captivel Portal
Auto Healing
Auto RF adjustments
Auto AP power adjustments
VLAN
802.11 WMM (Wireless Multimedia mode for QoS)
Multiple BSSIDup to 8
Package ContentsProSAFE Wireless-N Access Point
Wall-mount kit
Installation guide
Warranty/support information card
Safety CertificationUL/cUL, CE (EN60950-1)
Countries Certification (minimum set)FCC, IC, CE, EN55022/24, EN301489,
EN301489-17, EN30328, EN60950,
C-Tick, A-Tick, SRRC
Optional SupportPMB0351: 5 years OnCall 24x7
PMB0331: 3 years OnCall 24x7
PMB0311: 1 year OnCall 24x7
Product Ordering InformationWN370-10000S
Name | Value |
---|---|
Band | |
Device Type | Access Point |
LAN Ports | |
LAN Speed | |
Ports | 1 x 10 / 100 / 1000 Mbps, 4 x 10 / 100Mbps |
Security | WEP, WPA, WPA2 |
Speed | 300 Mbps |
Warranty | Lifetime |
Wireless | 802.11b/g/n |