TH-55LFE8W LCD Display

Stylish professional display with various funtions for your signage requirements

Overview

Stylish Design

A Stylish Design for Both Signage and Conference Rooms

The narrow bezel cabinet, from which all unnecessary decorations have been eliminated, draws the viewer’s attention directly to the image, for an eye-catching appearance in commercial facilities, conference rooms or reception areas.

Suitable for Multiscreen Configuration

Menu settings and adjusted values set on a single display can be cloned to other, same-size displays using a USB memory device. This is highly useful for adding and installing a number of displays.

Easy Display Functions

Bezel Adjustment

When this mode is turned off, a full-screen image of the display panel, including edges (the entire width of the frame), is displayed. This is especially suitable for displaying text information, since no words are hidden by the frame. The image areas that are hidden by borders can be adjusted in both vertical and horizontal directions.

Digital Zoom

This function lets you enlarge a portion of an image up to four times its normal size and display it on the full screen. This function can help give presentations greater impact.

User-friendly Control

A LAN Control Function for Internet-based control

This function is highly convenient for operating signage for multiple displays. Control is performed from a PC over a LAN network. General-purpose LAN cabling is used, and the PC allows troubleshooting if an error should occur, for immediate response.

Convenient Cloning for Same Size, Multi-display Operation

Menu settings and adjusted values set on a single display can be cloned to other, same-size displays using a USB memory device. The cloning function reduces the installation time of multi units installation.

Generous Connectivity for Professional Use

The LFE8 Series comes standard with a host of input terminals. In addition to providing versatile video displays, these terminals enable external control and simple video wall setup.

Easy signage without Set top box or PC

The LFE8 Series features a USB media player. When you insert the USB memory to the display and change the input to USB, the contents are automatically played, eliminating the need for a set-top box. Both videos and still images can be displayed, so a wide variety of original signage content can be used.

Flexible Configuration

Portrait and multi display configurations

The LFE8 series can be installed vertically, in portrait mode, or where space is limited, to meet a wide range of installation needs. A 5x5 multi display configuration is also possible, making it easy to create a video wall.

Tilt Orientation

LFE8 series are compatible with Tilt (0-20 degrees/Forward) orientation with landscape setting. Tilt orientation enables people to see the contents when you install the display in a ceiling position.

Specifications

Display Screen Size 55-inch (1209 mm)
Panel Type IPS / Direct-LED
Aspect Ratio 16:09
Effective Display Area 1209 x 680 mm
(W x H) (47.6 x 26.7)
Number of Pixels (H x V) 1920 x 1080 pixels
Brightness (Typ) 350 cd/m2
Contrast Ratio 1200:1
Response Time 9.0 ms (G to G)
Viewing Angle (Horizontal/Vertical) 178/178
(CR20)
Connection Terminal VIDEO IN 4-pole mini jack (M3) x 1
HDMI In HDMI TYPE-A connector x 2 * VIERA LINK is not supported.
DVI-D In/Audio In (L/R) DVI-D 24-pin x 1/Stereo Mini Jack (M3) x 1 (Shared with PC In)
PC In/Audio In (L/R) Mini D-sub 15-pin x 1/Stereo Mini Jack (M3) x 1 (Shared with DVI-D In)
USB USB connector (TYPE A) x 1, DC 5V/1A * USB 3.0 is not supported.
Control Serial D-sub 9-pin x 1, RS-232C Compatible
LAN RJ45 x 1 10 BASE-T/100BASE-TX, Compatible with PJLink
IR In/Out Mini Jack (M3) x 1/ x 1
Audio Audio Out Stereo Mini Jack (M3) x 1
Built-in Speaker 20 W [10 W + 10 W] (10% THD)
Electrical Power Requirements 110-127/220-240 V AC, 50/60 Hz
Power Consumption 170 W
On Mode Average Power Consumption*1 130 W
Power off Condition Approx. 0.3 W
Stand-by Condition Approx. 0.5 W
Mechanical Dimensions (W x H x D) 1239 x 712 x 62 mm (48.8 x 28.0 x 2.5)
Bezel Width 12.6 mm (0.5) (L/R/T), 14.5 mm (0.57) (B)
Weight Approx. 16.0 kg
(35.3 lbs.)
Pitch of Wall-hanging VESA Compliant 200 x 200 mm
(7.9 x 7.9)
Installation Requirement Orientation Landscape / Portrait
Tilting Angle 0-20 degrees forward with landscape setting*2
Operating Environment Temperature: 0C to 40 C (32 F to 104 F)*3 / Humidity: 20 % to 80 % (Non Condensation)*4
NOTE *1 Based on IEC 62087 Ed.2 measurement method.
*2 Please contact your sales representative with regard to the tilt angle before installation.
*3 Environmental temperature to use this unit at high altitudes (1400 m (4593 ft) and higher and below 2800 m (9186 ft) above sea level): 0 C to 35 C (32 F to 95F)
*4 Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.
This unevenness will disappear while applying current continuously. If not, consult the distributor.