My Account
main product photo

Panasonic 65" LCD - Full HD (1920 x 1080), LED, Brightness (350-cd/m2) TH-65LFE8W

SKU
227891
Brand
Panasonic
Manufacturer Link
Manufacturer Product Link
Warranty
1 Year Manufacturer's return to base

No Longer Available

$0.00
Buy Now And Earn 0 Reward Points!
Add to Compare

Failover and Failback

Failover and Failback Safeguards for Mission Critical Situations

The LF8 Series is equipped with a variety of signal input terminals : two HDMI, DVI-D, and USB. If the main video and audio signals are interrupted, the system immediately switches to alternative signals. This makes it ideal for mission critical control rooms and surveillance centers. If the main signals are restored, the original image is displayed.

Bakup Input (Quick) Setting Conditions

  Main
HDMI 1
HDMI 2
DVI-D		 PC
COMPONENT*
VIDEO		 USB
Backup HDMI 1
HDMI 2
DVI-D
PC
COMPONENT*
VIDEO
USB

Bakup Input (Normal) Setting Conditions

  Main
HDMI 1
HDMI 2
DVI-D		 PC
COMPONENT*
VIDEO		 USB
Backup HDMI 1
HDMI 2
DVI-D
PC
COMPONENT*
VIDEO
USB

:Selectable for both Primary and Secondary. : Selectable for either Primary of Secondary. : Not selectable for neither Primary nor Secondary.

* [COMPONENT] may be displayed as [RGB] depending on the settings of [Component/RGB-in select]. For more information, see the operating instructions.

Return to Top

Multi Monitoring & Control Software

Multi Monitoring & Control Software (Free) Lets You Control Devices in Groups

This free Panasonic software enables you to monitor and control up to 2048 devices over a LAN network from a single PC. As a monitoring function, the status of multiple devices can be listed in groups, and then detailed information on each device can be separately displayed. As a control function, control commands such as power ON/OFF, input switching and command inputs can be executed, and a schedule function can be used.

Download Software from Global Website

Return to Top

Cloning Function

Cloning Function Saves Labor When Setting Up Multiple Devices

You can easily copy the setting data of a master display to other displays using USB memory. This saves labor when making screen settings during the installation of multiple devices.

* If the inch sizes/series for the displays differ, the cloning function does not operate. Use common inch sizes/series.

Return to Top

Early Warning Software

Compatible with "Early Warning Software" for Sensing Display Problems in Advance

The LF8 Series support Early Warning Software (optional: ET-SWA100), which monitors the status of devices (projectors or flat-panel displays) connected to an intranet, reports device failures, and gives advance warnings by detecting predicted abnormalities, after installation to the PC has been completed. The status of displays in an intranet is observed, and problems are forecast, the occurrence of other problems is sensed, and notification is sent to the user.

* The use of this software will not detect malfunctions in all devices and equipment in advance.

Display Screen Size 65-inch (1638 mm)
Panel Type VA Panel/E-LED
Aspect Ratio 16:09
Effective Display Area 1428 x 803 mm
(W x H) (56.2″ x 31.6″)
Number of Pixels (H x V) 1920 x 1080 pixels
Brightness (Typ) 350 cd/m2
Contrast Ratio 5000:1
Response Time 6.5 ms (G to G)
Viewing Angle (Horizontal/Vertical) 176°/176°
(CR≥20)
Connection Terminal VIDEO IN 4-pole mini jack (M3) x 1
HDMI In HDMI TYPE-A connector x 2 * VIERA LINK is not supported.
DVI-D In/Audio In (L/R) DVI-D 24-pin x 1/Stereo Mini Jack (M3) x 1 (Shared with PC In)
PC In/Audio In (L/R) Mini D-sub 15-pin x 1/Stereo Mini Jack (M3) x 1 (Shared with DVI-D In)
USB USB connector (TYPE A) x 1, DC 5V/1A * USB 3.0 is not supported.
Control Serial D-sub 9-pin x 1, RS-232C Compatible
LAN RJ45 x 1 10 BASE-T/100BASE-TX, Compatible with PJLink™
IR In/Out Mini Jack (M3) x 1/ x 1
Audio Audio Out Stereo Mini Jack (M3) x 1
Built-in Speaker 20 W [10 W + 10 W] (10% THD)
Electrical Power Requirements 110-127/220-240 V AC, 50/60 Hz
Power Consumption 160 W
On Mode Average Power Consumption*1 115 W
Power off Condition Approx. 0.3 W
Stand-by Condition Approx. 0.5 W
Mechanical Dimensions (W x H x D) 1451 x 829 x 62 mm (57.2″ x 32.7″ x 2.5″)
Bezel Width 7.5 mm (0.3″) (L/R/T), 10.5 mm (0.42″) (B)
Weight Approx. 36.2 kg
(79.9 lbs.)
Pitch of Wall-hanging VESA Compliant 400 x 400 mm
(15.8″ x 15.8″)
Installation Requirement Orientation Landscape / Portrait
Tilting Angle 0-20 degrees forward with landscape setting*2
Operating Environment Temperature: 0°C to 40 °C (32 °F to 104 °F)*3 / Humidity: 20 % to 80 % (Non Condensation)*4
NOTE *1 Based on IEC 62087 Ed.2 measurement method.
*2 Please contact your sales representative with regard to the tilt angle before installation.
*3 Environmental temperature to use this unit at high altitudes (1400 m (4593 ft) and higher and below 2800 m (9186 ft) above sea level): 0 °C to 35 °C (32 °F to 95°F)
*4 Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.
• This unevenness will disappear while applying current continuously. If not, consult the distributor.
The TH-65LFE8W Installs in Just About Any Space. This slim design allows effective space utilization in stores, showrooms and conference rooms. With a depth of less than 62 mm, it is also not oppressive when mounted on a wall. The bezel is about the same width all around the perimeter. On the 65-inch model, the bezel is only 7.5 mm wide on the top and both sides, and 10.5 mm on the bottom. This slim bezel design helps viewers concentrate on the screen image. In addition, when replacing, for example, a 60-inch PDP TV, a larger, 65-inch model can fit into almost the same space.
⚫Slim & Stylish Design
⚫Connection Terminals for Professional use
⚫Portrait & Multi Display Configurations
⚫USB Signage Player