Swiftech Black SLI & CrossFireX 11 To 18mm Brass Lok-Seal G1/ 4" Connector ST-G1-4-MMEXT-SHORT-BK
SKU
148300
Brand
Warranty
1 Year Manufacturer's return to base
No Longer Available
$0.00
Buy Now And Earn 0 Reward Points!
Applications examples
|
40mm/1.6" PCI spacing: Komodo HD7900 series waterblocks in
CrossFireX with stock bridge
40mm/1.6" PCI spacing: Komodo HD7900 series waterblocks in
Quad CrossFireX with 1.6 XFire bridges
|
Dimensions
Recommended use
-
Initial Tip: If possible, attach the fittings to the cooling devices first! While not mandatory, it is always preferable to fastena fitting toa cooling device prior to installingthe device inside the case. This will eliminate interference issues that may be encountered when working with tools inside of space constrained enclosures.
-
Fasten the fitting by hand untilit mates with the surface of the cooling device. The amount of force necessary to screw the fittings down in finger tight mating position may vary from one device to another depending onvarious factors. Users are advised to always visually check on the actual position of the fitting relative to the device surface rather than solely relying on feel. There should be little -not to exceed the thickness of a sheet of paper, or no visible gap between the fitting lower lip and the device surface. See the illustration below.
-
For complete long-term safety and leak-free operations, Swiftech recommends that the fittings be locked in place using the recommended tools and that the torque levels specified below be applied:
Recommended Torque |
||
Soft Material |
Minimum |
Maximum (*) |
Acetal (POM) and acrylics |
1/4of a turn after initial contact between mating surfaces |
1/2of a turn after initial contact between mating surfaces |
Hard Materials |
Recommended |
|
Copper, brass, aluminum |
1/8 of a turn after initial contact between mating surfaces |
(*) For full 5mm thread depth please inspectthe devicethreads prior to applying the maximum
recommended torque when partial threads exist due to application necessity, only apply the
minimum torque.
Recommended Tools |
||
A small adjustable wrench with jaw opening up to 1
(25.4mm)
may be used as a universal tool instead
of the specific tools listed below
|
||
Specific tool sizes |
||
Male/male
Connectors
|
Fitting base hex:
Flat wrench
|
Lock Nut
Flat or adjustable wrench
|
G1/4 MMEXT Short (11-18mm) |
Metric: 16mm
Inch: 5/8
|
N/A |
G1/4 MMEXT Medium (20-33mm) |
Metric: 16mm
Inch: 5/8
|
Metric: 17mm
Inch: adjustable wrench
|
G1/4 MMEXT Long (41-65mm) |
Metric: 16mm
Inch: 5/8
|
Metric: 17mm
Inch: adjustable wrench
|
G Male-Male Lok-Seal SLI & CrossFireX connector fitting adjustable from 11
to 18mm
Part Number: G1/4-MMEXT-SHORT-BK
Product Description:
G Male-Maleadjustable
connector fittings for multiple VGA waterblocks in SLI or CrossfireX.
This product is part of the Lok-Seal family of fittings.
Contents & Features | Specifications |
|
|
|
|
|
|
Manufacturer: Swiftech. Swiftech are recognised as a leading force driving the high end thermal management scene in the personal computer industry. Pioneering work, innovation and an uncompromising dedication to extreme performance and industry leading quality have resulted in award winning products setting standards for others to follow. One of the founding fathers of liquid cooling for personal computers, the Swiftech name is recognised worldwide and synonymous with performance, innovation, quality and value.
Highlights:
* For SLI & CrossFireX configurations.
* Adjustable length from 11 to 18mm.
* Brass.
* G1/4" male to male.
Would you like to know more? Check out Swiftechs full product information page.
Highlights:
* For SLI & CrossFireX configurations.
* Adjustable length from 11 to 18mm.
* Brass.
* G1/4" male to male.
Would you like to know more? Check out Swiftechs full product information page.