Fractal Design Venturi Hp-14 Pwm White Fd-fan-vent-hp14-pwm-wt
No Longer Available
The Venturi High Pressure Series PWM fans, HP-14, are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios.
Designed with a variety of performance-increasing and noise-reducing features, these fans can move an amazing amount of air through restricted environments compared to other fans at the same, minimal noise level.
The HP-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) and one compatible with the standard 120mm hole spacing (105mm). The Venturi High Pressure Series PWM fans are ideal for those looking for a perfect balance between high performance and low noise built from sturdy, high quality materials.
Key features
- Featuring true FDB-bearings, providing silent operation coupled with a long lifespan
- Equipped with a counter-balanced magnet that reduces the axial tension on the bearing
- Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber
- Dense, sturdy construction, made from high grade glass fiber reinforced thermoplastic polymer
- Fan geometry is optimized for high pressure, delivering high performance results in high restriction usage scenarios, such as in use with large dense heatsinks or water cooling radiators.
- Featuring PWM control with a very wide speed range, starting at only 400RPM (400 +/- 100 RPM), ideal for CPU heatsinks or radiators, where the motherboard can control the fan speed based on the CPU temperature.
- Aerodynamically shaped thin stator struts reduce noise and unwanted turbulence.
- Strategically placed notches on the blades further reduce and diffuse any humming noise produced when the blades pass the stator struts
- The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation
- Comes with a PWM Y-cable, for connecting additional fans to a single PWM header on your motherboard or PWM fan controller
- 140mm fans come with an additional set of vibration-dampening corners are included that lends compatibility with 120mm fan mounts (105mm screw spacing). This enables the use of 140mm fans on many CPU coolers.
- Available in 120mm and 140mm fan sizes
- Available in two color combinations, Black blades, black corners, dark grey ("Gunmetal") frame and White blades, black corners, black frame
Specifications
Fan
HP-14 PWM
Size [mm]
140*140*25mm
Colors available
Black blades, black corners, dark grey ("Gunmetal") frame
White blades, black corners, black frame
Screw hole pattern
125*125mm
105*105mm
Connector
4-pin fan header
Bearing
FDB
Number of blades
7
Rotational speed [RPM]
1500
Acoustical noise [dB (A)]
30.1
Maximum air flow [CFM]
78.1
Maximum air flow [m 3 /h]
132.7
Maximum pressure [mm H 2 O]
1.94
Actual input power [W]
1.4
Maximum rated input current [A]
0.2
Nominal input voltage [V]
12V
Minimum startup voltage [V]
7V
Low (0-20%) PWM speed
400 RPM
Low PWM Static pressure
0.54 mm H2O
Low PWM Air flow
24.0 CFM
40.8 m3/h
Low PWM Noise level
< 10 dB (A)
Low speed adapter speed
N/A
Low speed adapter Static pressure
N/A
Low speed adapter Air flow
N/A
Low speed adapter Noise level
N/A
MTBF [hours]
150,000
Unit weight [g]
210
Package weight [g]
270
Cable length [mm]
500
Cable type
Braided all-black ribbon wire
Packaging dimensions [mm]
( Including hanging tab)
200*142*30
Packaging dimensions [mm]
(Excluding hanging tab )
167*142*30
The Venturi Series of fans delivers high quality design and construction bringing forth a leading performance fan series with built-in rubber vibration dampening corners coupled with top quality electronics and materials. Venturi fans are ideal for high pressure or high airflow usage scenarios featuring detailed engineered elements that contribute to a low-noise yet a maximum performing solid fan.
