Tenda i24 AC1200 Wireless Ceiling Mount Access Point (ELETENDi24)

SKU
366302
Brand
Warranty
Standard Manufacturer's Warranty

No Longer Available

$0.00
Buy Now And Earn 0 Reward Points!

i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner.

Mode i24
Appearance Ceiling AP
Dimension 178 mm × 178 mm × 38 mm
Frequency Band 2.4 GHz, 5 GHz
Wireless Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Data Rate 2.4 GHz data rate: 1 - 300 Mbps
5 GHz data rate: 6 - 867 Mbps
Ethernet Ports 1 × 10/100/1000 Base-TX port
Button 1 × Reset
LED indicator 1 × Power
Maximum Power Consumption Full-load 13.5W
Power supply standard IEEE 802.3at
Operating Mode AP, Client+AP
SSID Hidden Supported
Max. No. of SSID 2.4 GHz: 8
5 GHz: 4
Max. connected clients 2.4 GHz: 128
5 GHz: 128
WEP Supported
WPA2-PSK Supported
WPA-PSK Supported
WPA2 Supported
WPA Supported
Access Control MAC address-based
Adjustable Transmission Power Supported
AP Isolation Supported
Connected clients control Supported
RSSI Threshold Supported
WMM Supported
VLAN Tagging for SSID Supported
Antenna gain 4 dBi
Output Power 2.4 GHz MCS8 output power: 26 +/- 1.5 dBm
5 GHz MCS8 output power: 24 +/- 1.5 dBm
Sensitivity 802.11b RX sensitivity: -93 dBm
2.4 GHz 802.11n (MCS7) RX sensitivity: -72 dBm
5 GHz 802.11a RX sensitivity: -93 dBm
5 GHz 802.11n (MCS7) RX sensitivity: -74 dBm
LED control Supported
Diagostic Ping, Traceroute
Schedule Reboot Supported
Reboot at specified interval Supported
Management Web UI
Syslog Supported
Firmware Upgrade Local and AC upgrade
Reboot Local and AC reboot
Reset Local and AC reset
Backup Configuration Supported
Restore Configuration Supported
Default Settings Default login IP address: 192.168.0.254
Default user name: admin
Default password: admin
Temperature Operating temperature: -10°C - 45°C
Storage temperature: -30°C - 70°C
Humidity Operating humidity: (10% - 90%) RH, non-condensing
Storage humidity: (10% - 90%) RH, non-condensing
Certification CE/FCC/RoHS