Fsp 600w 80plus Platinum Ipc-2u Fsp600-80wepb
No Longer Available
FSP600-80WEPB is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 600 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.• 80 Plus Platinum
• Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all outputs
• Resettable power shut down
• Four +12V output (+12V/1,+12V/2,+12V/3,+12V/4)
• 100% burn-in under high ambient temperature(50℃)
• Vacuum-impregnated transformer
• MTBF:100K hours at 25℃
• 100% Hi-pot tested
• Line input fuse protection
Model Name | FSP600-80WEPB | |
---|---|---|
Wattage | 600W | |
Dimension | 240mm (L) × 100 mm (W) × 70mm (H) | |
Product Highlight | Efficiency Level | 80 Plus Platinum |
Altitude | 5000M | |
PMBus | V1.2 | |
General Specification | Effciency | 92% 230VAC |
Voltage Regulation | +3.3V, +12V, +5V, +5SB: ±5% -12V: ±10% | |
Input Electrical Specification | Input Frequency | 47 ~ 63 Hz |
Input Current | 115V@ 10.0 Amps-rms maximum 230V@ 5.0 Amps-rms maximum | |
Output Specification | Hold-up time | 115V/60Hz 16mSec. Minimum@100% Load, 230V/50Hz 16mSec. Minimum@100% Load |
Ouput Voltage Regulation | +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum | |
Ripple & Noise | 115V-rms/230V-rms 5V 20ms Maximum | |
Over current protection | 3.3V:50mV p-p 5V:50mV p-p 12V1:120mV p-p 12V2:120mV p-p 12V3:120mV p-p 12V4:120mV p-p -12V:120mV p-p 5Vsb:50mV p-p | |
Environmental Requirement | Temperature Range | Operating : 0 to +50℃ Storage :-20 to +80℃ |
Humidity | Operating : 85% to % RH, Non-condensing Storage : 95% to % RH, Non-condensing | |
MBTF | The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage | |
Safety | CE,FCC,TUV,UL/cUL,CCC |
Output Voltage and Current Rating
+3.3V | +5V | +12V1 | +12V2 | +12V3 | +12V4 | -12V | +5Vsb | |
---|---|---|---|---|---|---|---|---|
Ripple-Noise(R-P) mV | 50mV | 50mV | 120mV | 120mV | 120mV | 120mV | 120mV | 50mV |
Regulation Load % | ±5% | ±5% | ±5% | ±5% | ±5% | ±5% | ±10% | ±5% |
Output Max.(A) | 25A | 25A | 16A | 16A | 16A | 16A | 0.5A | 4A |
Output Min.(A) | 0.1A | 1A | 1A | 1A | 1A | 1A | 0A | 0A |
Notes
- The +3.3V and +5V total output shall not exceed 150 watts.
- The total output shall not exceed 600 watts
- Maximum combined current for the 12V outputs shall be 48A
- Ripple and noise measurements shall be made under all specified load conditions through a singple pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.
Details:
TEMPORARY
Specifications:
Watts: 600 W
Dimension: 260 X 100 X 70 (mm)
80 Plus Efficiency Level: 80 Plus Platinum
PMBus: V1.2
Output Voltage [Output Current: Min ~ Max (A)]:
- 3.3V: 0.1-25
- 5V: 1-25
- 12V1: 1-16
- 12V2: 1-16
- 12V3: 1-16
- 12V4: 1-16
- -12V: 0-0.5
- 5Vsb: 0-4