Seasonic Power Supply: 1050W 80 Plus Gold X-Series fully modular PSUSEAX1050WMGD
No Longer Available
80 PLUS®Gold
Seasonic was the forerunner of creating the very first 80 PLUS® Gold certified power supply on the market and since that time it has built a very popular Gold series lineup that covers a full power range of power supplies with impeccable performance and efficiency. The highly efficient 80 PLUS® Gold certification guarantees greater than 87 %, 90 % and 87 % efficiency at 20 %, 50 % and 100 % operating loads, respectively. The clear advantage of buying a power supply with 80 PLUS® Gold rating is the fact that the less energy gets wasted during power conversion, the lower the operating costs will be for the user.
Dual Copper Bars
Due to their increased diameter, pure copper bars carry high current much more effectively than the traditional copper strips. If the goal is to achieve high quality power conversion with stable power output and minimized loss, it is very important that power conduction in the high wattage area remains extremely efficient, because it also reduces impedance and minimizes voltage drop as the load increases.
7 Years Warranty
Our commitment to superior Seasonic quality.
Sanyo Denki Fan
The world-renowned Sanyo Denki ball bearing fans are made of the highest quality components to ensure ultra-low noise performance. The fan’s perfect balance and even rotations are achieved via the use of spoon-shaped, high-density plastic fan blades that are finished off with smoothed leading edges. Sanyo Denki fans are known for their strict tolerance ball bearings and precision copper axels. Instead of the industry standard of two balancing points they use three points to strengthen the mount and further stabilize the blade.
The New Seasonic S3FC Fan control
What is S3FC?
The industry’s first, Seasonic patented, advanced three-phased thermal control balances between silence and cooling. This Hybrid Silent Fan Control functions in three operational stages: Fanless Mode, Silent Mode, and Cooling Mode. In addition, there is a switch provided to allow for manual selection between the Seasonic S2FC (fan control without Fanless Mode) and the S3FC (fan control including Fanless Mode).
New! Power saving by hysteresis
Hysteresis is achieved by an additional fan control IC, which optimizes how frequently the fan switches on and off. At 25 °C ambient temperature the fan turns on when the load rises above 35 % (±5 %) and it turns off when the load drops below 25 % (±5 %). Due to this lag in response the fan switches on and off less frequently, which reduces noise and power loss in Fanless Mode and Silent Mode.
Type: ATX12V / EPS12V
Maximum Power: 1050W
Fans: 1
PFC: Active
Main Connector: 20+4Pin
+12V Rails: Single
PCI-Express Connector: 6 x 6+2-Pin
SATA Power Connector: 11
SLI: Certified
CrossFire: Ready
Modular: Yes
Energy-Efficient: 80 PLUS GOLD Certified
Input Voltage: 100 - 240 V
Output: +3.3V@25A, +5V@25A, +12V@87A, -12V@0.5A, +5VSB@3A
Dimensions: 7.49" x 5.91" x 3.39" L x W x H
Weight: 9 lbs.
Connectors
1 x 20+4Pin Main Power Connector
1 x EPS12V / ATX12V 4+4Pin
1 x EPS12V 8Pin
6 x PCI-E 6+2Pin
11 x SATA
8 x Peripheral
2 x FDD
