Sunix USB2311C one USB 3.1 Enhanced SuperSpeed Type-C Single port PCI Express Host Card (NO cable including in) (USB2311C)

SKU
303311
Brand
Warranty
Standard Manufacturer's Warranty

No Longer Available

$84.00
Buy Now And Earn 84 Reward Points!
Super-Speed plus USB 3.1 Type-C is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and portable devices. With better performance, small form factor, high power capacity feature, Super-Speed plus USB 3.1 Type-C interface will be the trendy of IT technology. 

SUNIX USB2311C is a single-port Super-Speed USB 3.1 PCI Express card, and it’s compliant with the PCI Express Generation 3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2311C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2311C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Hardware
BUS PCI Express Spec 3.0, Single-Lane (x1)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System
USB Communication
Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 1-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Power
Source +5VDC / SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)
Driver Support
Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)
Regulatory Approvals
EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE
Physical Characteristics
PCB Dimension 65.7 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Sunix USB2311C one USB 3.1 Enhanced SuperSpeed Type-C Single port PCI Express Host Card (NO cable including in)