Ajax wired security siren — StreetSiren Fibra
StreetSiren Fibra is a wired Ajax security siren that can be installed outdoors and indoors. The siren is equipped with an LED frame and a piezoelectric detector, which is capable of producing a sound with a volume of up to 113 dB. The wired siren for the StreetSiren Fibra alarm system works as part of the Ajax security system. The device communicates with the security system control panel via a secure wired Fibra protocol, the communication range of which is up to 2 kilometers when connected via a U/UTP cat.5 twisted pair cable.

The principle of operation of the wired street siren StreetSiren Fibra
StreetSiren Fibra is a wired siren for outdoor installation. The device is equipped with a piezoelectric buzzer for audible notification and an LED frame for visual notification. The wired siren for the StreetSiren Fibra alarm system is responsible for:

1. Alarm messages — the siren responds to security alarms and tamper activation. When triggered, the siren turns on the LED backlight and the buzzer in less than a second. This principle of operation helps to attract the attention of neighbors and scare off intruders.

2. Security status indication — a wired street siren for signaling can notify with LED indication that the object is armed. Additionally, the device notifies you with a backlight and a sound about entry/exit delays. Thanks to this function, when controlling the security system with a keypad or a key fob, the siren can remind you to disarm when entering the facility.

Features of a wired siren for street installation StreetSiren Fibra
Outdoor wired siren StreetSiren Fibra has a number of the following features:

* Data transfer using the Fibra wired protocol
To transmit messages, the outdoor siren uses Fibra technology, a two-way wired data transfer protocol. Fibra provides reliable and fast communication between the security control panel and other devices. Fibra instantly delivers alarms and events, even if 100 devices are connected to the system. The Fibra protocol encrypts messages and verifies each communication session with devices. Thus, sabotage and replacement of the siren by an intruder is prevented. The protocol provides for regular polling of sirens and other system devices by the central (hub) at a specified frequency in order to control communication and display device statuses in Ajax applications in real time.

* Possibility to adjust the sound volume and duration of the alarm
In Ajax applications, you can adjust the volume and duration of the alarm, as well as determine which sensors will turn on the siren. During an alarm, the siren sounds from 3 to 180 seconds, with a sound volume of 85 to 113 dB.

* Protection against sabotage
There is a tamper button on the body of the StreetSiren Fibra wired siren, which activates the alarm mode if an intruder tries to remove the siren from the mount, open or open the case. Also, a wired siren raises an alarm when the main power is lost.