BE550G-AZ Features
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Data-line Protection
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from back door surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-start capable
Provides temporary battery power when the utility power is out.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms
Provides notification of changing utility power and UPS conditions.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
Battery replacement without tools
Allows quick, easy battery replacement.
ERROR: No Translation Found
Back-UPS ES Features & Benefits
Protection
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Data line surge protection
Provides protection of connected equipment from power surges on the data lines.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
Convenience
Audible alarms
Provides notification of changing utility power and UPS conditions.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable
Provides temporary battery power when the utility power is out.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Resettable circuit breakers
Enables a quick recovery from overload events.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Output
Output Power Capacity
330Watts /550 VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
47 - 63 Hz
Waveform Type
Stepped approximation to a sinewave
Output Connections
(4) Australian (Battery Backup)
(4) Australian (Surge Protection)
Output Voltage Tolerance
+/- 5% static and 100% load step
Input
Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 5 Hz (auto sensing)
Input Connections
Australian/Chinese
Cord Length
1.83meters
Maximum Input Current
10A
Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
16hour(s)
Replacement Battery
APCRBC110
Runtime Graph
Communications & Management
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
Surge Protection and Filtering
Surge energy rating
310Joules
Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Data Line Protection
RJ-45 Modem/Fax/DSL/10-100 Base-T protection,Analog phone line for phone/fax/modem/DSL (RJ-45 connector)
Physical
Maximum Height
89.00mm
Maximum Width
224.00mm
Maximum Depth
311.00mm
Net Weight
6.02KG
Shipping Weight
7.05KG
Shipping Height
127.00mm
Shipping Width
279.00mm
Shipping Depth
400.00mm
Master Carton Weight
15.00KG
Color
Black
SCC Codes
1073130427541 8
Units per Pallet
80.00
Environmental
Operating Environment
0 - 40C
Operating Relative Humidity
0 - 95%
Operating Elevation
0-9000meters
Storage Temperature
-15 - 40C
Storage Relative Humidity
0 - 95%
Storage Elevation
0-9000meters
Audible noise at 1 meter from surface of unit
0.00dBA
Conformance
Regulatory Approvals
A-tick,C-tick,CE,Telepermit
Standard Warranty
2 years repair or replace
Environmental Compliance
RoHS
*Except where noted, all prices are Estimated Resale Price (ERP) - With Tax/VAT. Pricing in other locations and sites may vary.
**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.