Includes : CD with software , Qty 2 - Detachable 2.0 m IEC power cords ,
Telephone Cable , USB cable , User Manual , Warranty card
-
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in
specific power environments or generator applications.
-
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or
tightening the output voltage regulation.
-
Audible alarms
Provides notification of changing utility power and UPS power conditions
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery that
needs to be replaced.
-
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely
preventive maintenance
-
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
-
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that
require UPS battery back-up while providing surge only protection for
less critical equipment
-
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and
component power-supply stress.
-
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the
wall circuit.
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
Dataline surge protection
Provides protection of connected equipment from power surges on the data
lines.
-
Disconnected battery notification
Warns when a battery is not available to provide backup power.
-
Extendable Run Time
Additional batteries can be added to provide power to the load for an
extended period of time in the event of utility supply failure.
-
Green mode
Patent-pending operating mode that bypasses unused electrical components
in good power conditions to achieve very high operating efficiency
without sacrificing any protection.
-
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while
batteries are being replaced
-
Intelligent battery management
Maximizes battery performance, life, and reliability through
intelligent, precision charging.
-
LCD graphics display
Text and mimic diagrams that display modes of operation, system
parameters and alarms.
-
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
-
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
-
Safety-agency approved
Ensures the product has been tested and approved to work safely with the
connected service provider equipment and within the specified
environment.
-
Serial connectivity
Use any Home Automation network to monitor and control the S20 through
its RS-232 serial port. For information on how to communicate with the
S20, see APC's Application Note #102. Crestron and AMX installers should
visit their respective websites for information on how to integrate the
S20 into those networks.
-
Telephone dataline surge protection
Provides protection of connected equipment from power surges traveling
on telephone lines.
-
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access
to other receptacles.
-
USB connectivity
Provides management of the UPS via a USB port (not available on all
models).
-
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades
and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Energy Management Function
Energy saving feature automatically power off peripherals when the a
master device, usually a PC, hibernates or is shut down. Power to
peripherals is immediately restored when the master device wakes up or
is switched on.
-
Green mode
Patent-pending operating mode that bypasses unused electrical components
in good power conditions to achieve very high operating efficiency
without sacrificing any protection.
-
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage
conditions without using the battery (not available on all models).
-
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your
power quality (high, medium or low sensitivity), maximizing useful
battery life and protecting sensitive electronics.
-
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS
transfers to battery to maximize useful battery life and protect
sensitive electronics.
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
Intelligent battery management
Maximizes battery performance, life, and reliability through
intelligent, precision charging.
-
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely
preventive maintenance
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery that
needs to be replaced.
-
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access
to other receptacles.