Arctic Silver Arctic Silver Adhesive (7g) As-asta-7
No Longer Available
Features: |
|
Characteristics: Made with 99.8% pure micronized silver. 62% to 65% silver content by weight. Superior thermal performance. |
|
Temperature Range: - 40C to >150C (Bond strength is slightly weakened at temperatures below 0C due to crystallization.) |
|
Negligible Electrical Conductivity: Arctic Silver Thermal Adhesive was formulated to conduct heat, not electricity. NOTE: Even though Arctic Silver Thermal Adhesive is specifically engineered for high electrical resistance, it should be kept away from electrical traces, pins, and leads. The cured adhesive is slightly capacitive and could potentially cause problems if it bridged two close-proximity electrical paths. |
|
Compliancy: RoHS Compliant. | |
Components:
Although heavier per set than Arctic Alumina Adhesive due to its use of
silver rather than ceramic, each set of Arctic Silver Adhesive |
|
Storage: |
|
Precaution: |
Features:
* Characteristics: Made with 99.8% pure micronized silver. 62% to 65% silver content by weight offering superior thermal performance.
* Temperature Range: -40C to +150C.
* Negligible Electrical Conductivity: Arctic Silver thermal adhesive was formulated to conduct heat, not electricity.
* Components: A kit of Arctic Silver thermal adhesive consists of two syringes containing a total of 7 grams of adhesive (3.5 grams each of parts A and B) and a plastic reusable mixing wand.
* Storage: Arctic Silver thermal adhesive should be kept cold and away from UV light. Arctic Silver recommends refrigerating the unused material and allowing it to come to room temperature prior to use.
* Precaution: Arctic Silver thermal adhesive is a permanent adhesive.
Would you like to know more? Check out Arctic Silvers full product information page.