Cisco (15216-lc-sc-5=) Fiber Patchcord - Lc To Sc - 4m 15216-lc-sc-5=

SKU
228954
Brand
Warranty
Standard Manufacturer's Warranty

No Longer Available

$0.00
Buy Now And Earn 0 Reward Points!
DESCRIPTION
CISCO (15216-LC-SC-5=) FIBER PATCHCORD - LC TO SC - 4M
SKU
15216-LC-SC-5=
BRAND
CISCO

The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a cost-effective manner without sacrificing operational ease of use. The Cisco ONS 15216 4 Channel OADMs are well suited to applications with minimal wavelength requirements and tight space and power constraints, such as cell site and customer premises terminations. Ten models are available, covering a 40-channel 100-GHz channel plan.

Figure 1.      The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexer

Applications

The Cisco ONS 15216 4 Channel OADM supports standard network topologies such as point-to-point and ring. With the introduction of omnidirectional and colorless reconfigurable optical add-drop multiplexer (ROADM) functionality on the Cisco ONS 15454 MSTP, the combined products allow additional network topologies, such as the termination of a spur or rings, originating on a Cisco ONS 15216 4 Channel OADM, into the colorless ports of the ROADM node (Figure 2). This configuration does not consume a ROADM degree, allowing the node to scale beyond eight directions of connectivity in a mesh-ROADM application.

Figure 2.      OADM Nodes in a Spur Configuration Interconnecting with a Colorless Mesh ROADM Node

Another application for the Cisco ONS 15216 4-channel OADMs is as the add/drop stage of a single-module ROADM node. When only a small number of channels are required to add/drop at a ROADM node, using one or more 4-channel OADMs can save costs and space compared to the typical configuration using the Cisco ONS 15216 Mux/Demux 40 Channel Patch Panel. When the number of add/drop channels exceeds the deployed capacity of the OADMs, additional units can be added or replaced with a Cisco ONS 15216 Mux/Demux 40 Channel Patch Panel without affecting the service of existing pass-through channels.

Figure 3.      An OADM Used as the Add/Drop Stage of a Single-Module ROADM

Edge Mounting Bracket

A Cisco ONS 15216 4 Channel OADM occupies a single position in the Cisco ONS 15216 Edge Mounting Bracket. The mounting bracket occupies one rack unit (1RU) and mounts into a standard-19-inch rack. It has four positions for mounting OADMs.

Figure 4.      Up to Four OADMs Mount into a 1RU Edge Mounting Bracket

Features and Benefits

The Cisco ONS 15216 4 Channel OADM provides the following customer benefits:

   Cost-effective DWDM add/drop capability

   Best-in-class operational efficiency, with zero electrical power requirements

   High port density: four OADMs can be mounted in a 1RU bracket

   Low optical insertion loss for improved distance and performance

   USB port for passive inventory management

   Cisco Transport Controller (CTC) manageability for advanced fault isolation

   CTP support for efficient network design verification