D-Link DPE-101GI Power Over Ethernet (PoE) Injector The DPE-101GI Power Over Ethernet (PoE) Injector is designed to supply a power and data connection to PoE devices such as an IP Camera or Wireless Access Point. The DPE-101GI gives you the ability to mount your PoE device virtually anywhere in a building, such as on ceilings or near entryways, by eliminating the need for a nearby power outlet and attached power supply. D-Link�s DPE-101GI combines electrical power with a Gigabit network connection and produces a Gigabit Power over Ethernet (PoE) signal, allowing a single Ethernet cable to carry both data and power to a device.

Plug-and-Play with no software required
Easy installation of PoE devices where a power outlet is not available
Reduces installation and network equipment costs
Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones
Output: 0.4 A at 48 V
Power Over Ethernet (PoE) Injector for 10/100/1000T connections delivers power up to 100 meters (328ft)
Plug-and-Play with no software required
Easy installation of PoE devices where a power outlet is not available
Reduces installation and network equipment costs
Provides power over existing network cabling to PoE devices such as access points, IP cameras and IP phones
Lightweight and compact
Output: 0.4 A at 48 V
Gigabit Connectivity
Power Over Ethernet (PoE) Injector for 10/100/1000T connections delivers power up to 100 metres (328ft)
Connect your devices at Gigabit speeds, all within a compact device
Technical Specifications
Ports
P + Data Port (out)
Supports half/full-duplex operation
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliant
10/100/1000BASE-T port
Data Port (in)
Supports half/full-duplex operation
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliant
10/100/1000BASE-T port
Physical
Dimensions (L x W x H)
57.4 x 55.0 x 27.0 mm (2.26 x 2.17 x 1.06 inches)
Weight
113.4 grams (0.25 lbs)
Power
Consumption: 19.2 watts max
Output: 0.4 A at 48 V
Temperature
Operating: 0 to 50 ?C (32 to 122 ?F)
Storage: -20 to 70 ?C (-4 to 158 ?F)
Humidity
Operating: 10% to 90% non-condensing
Storage: 5% to 90% non-condensing
Certifications
CE
FCC
VCCI
C-Tick
IC