KINGSTON HX316C10FK2/ 8, 8GB 1600MHZ DDR3 CL10 DIMM (KIT OF 2) HYPERX FURY BLUE HX316C10FK2/8
No Longer Available
HyperX FURY DDR3 Memory
Auto-overclocking up to 1866MHz to get you in the game faster.
HyperX® FURY DDR3 memory automatically overclocks up to 1866MHz1 for hassle-free, plug-and-play functionality that gets you in the game faster and instant top-level performance that helps you win it. With voltages as low as 1.35V, it draws less power and generates less heat, while supporting Intel's new 100 Series chipset. Its asymmetric, aggressive design lets you stand out from the crowd of "squared" designs and features quality aluminum and a diamond-cut finish. It's available in black, blue, white and red with a black PCB to match the latest color schemes of motherboards, cases and other components.
- Automatic overclocking up to 1866MHz*
- Voltages start as low as 1.35V
- Asymmetric, aggressive heat spreader design
- Available in multiple colors with a black PCB
*HyperX PnP memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS.
-
AUTO-OVERCLOCKThe Fury recognizes your platform settings and automatically overclocks to the published frequency, no adjustments in BIOS needed. (HyperX PnP memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS.) -
ASYMMETRIC HEAT SPREADERFURY’s asymmetric heatspreader design lets you stand out from the “square” crowd. It’s available in black, blue, red and — for the first time in the HyperX line — white, with a black PCB. So your rig can reflect your style and you can show it off with pride — without spending a lot, since FURY is affordably priced. -
INDUSTRY-LEADING RELIABILITYThe Fury is 100-percent factory tested, compatible with Intel and AMD platforms, and tested with all popular brands of motherboards.
SPECIFICATIONS
CL(IDD) 10 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 37.5ns (min.)
Maximum Operating Power TBD W* (per module)
UL Rating 94 V - 0
Operating Temperature 0o
C to 85o C
Storage Temperature -55o
C to +100o C
*Power will vary depending on the SDRAM used.
FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• Height 1.291” (32.80mm) w/heatsink, single sided
component
