VDSL/ADSL WiFi Modem Router
Connect to the Internet with your choice of a super-fast DSL or fibre service using the VDSL2/ADSL2+ modem or Ethernet WAN port. The NBN-ready NF10W connects your home or office today, and is equipped with a Gigabit Ethernet WAN port to provide an instant connection to a Fibre / NBN / UFB service when available. Create multiple high speed WiFi connections using the Wireless N300 Access Point, and establish a storage network using the 2 USB ports to share hard drive files with all connected users.  Designed to keep you connected as technology evolves, the NF10W features IPv6 for the next generation of IP addressing and offers Layer 2 bridge mode support and a WPS button for simple and secure setup.



NBN Ready
Be ready for the future with a router that connects to the NBN’s Fibre to the Node (FTTN) and Fibre to the Premises (FTTP) services. Connect to FTTN using VDSL technology designed to deliver high speeds into buildings; or benefit from FTTP speeds reaching 100Mbps using the Gigabit Ethernet WAN port to access this service.

Access Fibre to the Node (FTTN)
FTTN is set to dominate, and homes and businesses with a VDSL connection will be ready to take immediate advantage of the unmatched speeds offered by the NBN. The NF10W gives you instant access to data speeds exceeding 100 Mbps, both download and upload.



Strong WiFi
All device features can be shared with multiple users via the built-in WiFi access point or the four LAN Ethernet ports. The high speed WiFi N provides a signal with the power to penetrate the far corners of your house, and you will have the capacity to simultaneously connect multiple WiFi enabled devices such as laptops, smart phones, gaming consoles, tablets and PCs.

USB file sharing
The NF10W comes equipped with two USB host ports that can be used to connect USB devices so their capabilities can be shared with all connected users. Connect a USB hard drive so that all stored files can be accessed and shared.
PACKAGE INCLUDES
NetComm Wireless VDSL/ADSL WiFi Modem Router
Power Adapter
Printed Quick Start Guide
Ethernet Cable (RJ-45)
Phone Cable (RJ-11)
Wireless Security Card
Warranty Card
ENVIRONMENTAL AND PHYSICAL
Operating temperature: 0-40°C, Humidity: 10%-95% non-condensing
Storage temperature: -20-70°C, Humidity: 5%-95% non-condensing
DC Input Voltage 12V/1.5A
Dimensions: 117(W) x 160 (H) x 71 (D) mm
Weight: 300 grams
DEVICE INTERFACE
1 x RJ45 10/100/1000Mbps WAN port
1 x RJ11 VDSL port
4 x RJ45 10/100Mbps LAN ports
2 x USB 2.0 Ports (storage)
1 x Reset button
1 x WPS button
1 x WLAN button
1 x Power jack
1 x Power switch
LED (Power/DSL/Internet/WAN/LAN1-4/WLAN/WPS/USB1/USB2)
VDSL FEATURES
ITU-T G.993.2 VDSL2
Support 8a, 8b, 12a, 12b, 17a profile
Support G.vector
Support ATM and PTM
Support G.INP
PPPoE/PPPoA/IPoA/Dynamic IP/Bridge
ADSL2+
ITU 992.1 (G.dmt) Annex A,
ITU 992.2 (G.lite),
ITU 992.3 ADSL2 (G.dmt.bis),
ITU 992.5 ADSL2+
Annex L / Annex M
ETHERNET WAN
PPPoE, DHCP client, Static IP
WIRELESS
IEEE 802.11n. Backwards compatible with IEEE 802.11b/g/a
2.4GHz WiFi
SSID broadcast or in stealth mode
Auto/Manual Channel selection
WEP/WPA/WPA-PSK/WPA2/WPA2-PSK
WPS button (WiFi Protected Setup)
NAS
File sharing
DLNA
SECURITY
Firewall
MAC filtering
ROUTING
Static Route
Dynamic Route (RIP v1/v2)
DMZ
Supports Layer 2 Bridge Mode
ADMINISTRATION
QoS
SNMP
UPnP
Syslog
Web-based UI
Remote Login
TR-069 Auto provisioning
Backup/Restore Settings
COMPLIANCE
RCM
?