PowerShield Commander 1000VA/ 700W Line Interactive Pure Sine Wave Tower UPS with AVR PSC1000

SKU
192804
Brand
Warranty
1 Year Manufacturer's return to base

No Longer Available

$0.00
Buy Now And Earn 0 Reward Points!

QUICK OVERVIEW

Telephone / Modem / LAN Surge Protection, Australian Outlets

PowerShield Commander 1000VA / 700W Line Interactive Pure Sine Wave Tower UPS with AVR. Telephone / Modem / LAN Surge Protection, Australian Outlets

Designed to ensure clean power and reliable operation of all kinds of IT devices in the network system. The Commander protects your equipment against power failures, power sags, power surges, under voltage and over voltage that can harm your equipment or result in corrupted data. The pure sine wave output on battery backup is best for server and motor applications.

The Commander offers features needed for cost effective network protection and comes with the proven reliability users have come to expect from PowerShield. As well as a reliable shutdown solution, the Commander extends runtime capacity, has enhanced connectivity options to manage as well as monitor the UPS remotely.

It comes with the highest surge rating of any standard UPS with 1558 joules and 40,000 Amp surge protection. The narrow output voltage variance of 5% ensures that sensitive equipment is subjected to only small voltage inconsistencies. The LCD display gives the user the ability to see voltages in/out, frequency in/out as well as temperature, load and battery voltage. In addition, these UPSs have Real Time Battery Management which tells how many minutes backup the user has when the power goes off. This is calculated by looking at battery voltage, temperature and condition of the batteries and the size of the load to be protected.

Features
Works for gates, camera surveillance, computers, telephone systems, servers, and other sensitive electronic equipment.
Best specifications in its class
Intelligent real time battery backup display
Smart 5% AVR with 2 step buck and boost
Pure sine wave line interactive
Intelligent double stage charger control which translates to a faster recharge rate
Generator compatible
Highest surge rating - 1558 joules of surge protection

Unit Weight: 15 kg
Unit Dimensions (W x D x H cm): 20 x 38 x 18

CAPACITY

1000VA/700W

TOPOLOGY

Line Interactive , Pure Sine   Wave

INPUT

INPUT VOLTAGE RANGE

180 - 300Vac

FREQUENCY

47Hz - 65Hz, 50/60Hz Auto-sensing

OUTPUT

OUTPUT VOLTAGE

240 ± 5% (2 step buck and boost)

OUTPUT VOLTAGE   REGULATION

Nominal Voltage ± 5%

OUTPUT VOLTAGE   SELECTABLE

200Vac or 220Vac or 230Vac or 240Vac

FREQUENCY

47 - 55Hz for 50Hz nominal, 56Hz - 65Hz for 60Hz nominal or   (battery mode 50Hz ± 1%)

WAVE FORM - AC MODE

Pure Sine Wave

WAVE FORM - BATTERY   MODE

Pure Sine Wave

TRANSFER TIME

<6ms

LOAD CREST FACTOR

3:1

AUSTRALIAN SOCKETS

2

10AMP IEC OUTLETS


 

3


 

BATTERY TYPE

Sealed maintenance free lead   acid batteries (12V/7.2AH)


 

NUMBER OF BATTERIES

2

CHARGER

Smart CPU controls over current, over voltage, thermal   protection and battery condition

RECHARGE TIME

Less than 3 hours to 90% (smart two mode pulse charging)

TYPICAL BACKUP

Half load 14 minutes, full load 5 minutes

INPUT SURGE PROTECTION

1581Joules/40,000Amps

SHORT CIRCUIT

AC Fuse

TELEPHONE / MODEM / LAN

RJ45, Full time telephone, modem or LAN protection. C-tick,   A-tick

INTERFACE

USB & RS232 as Standard, Intelligent slot for   optionalSNMP or AS400 dry contact

SOFTWARE

® PowerShield UPSilon 2000 compatible with Windows, Linux,   Novell & Unix

LCD DISPLAY

Sophisticated LCD - input voltage, output voltage,   frequency, load, battery status, smart remaining backup time

AUDIBLE ALARM

Alarm - on battery, overload, short circuit, over   temperature, faulty battery, abnormal operation

DIMENSIONS (D X W X H)

(380 x 200 x 180)mm

WEIGHT (NET/GROSS)


 

(15kg/16kg)

TEMPERATURE

0-40° C

HUMIDITY

0 - 95% (RH Non-condesing)

NOISE LEVEL


 

Less than 40dBA @ 1Meter

SAFETY

EN 50091-1-1

EMC

Class B, EN 50091 -2, FCC part 15, IEC1000-2-2, C-tick (   Full time EMI-RFI filtering)

ROHS

Directive 2011/65/EU

The PowerShield Commander UPS is designed to deliver clean power to and promote reliable electrical operation for all types of IT equipment in a network environment. The Commander protects your devices against power failures, power surges, under and over voltages that can harm your equipment or result in corrupted data. The PowerShield Commander UPS provides cost effective and a high level of protection for sensitive electronic devices while offering options for graceful shutdown of valuable IT equipment.The PowerShield Commander includes the highest surge rating of any standard UPS. 1558 Joules / 40,000 Amp surge protection.
⚫Works for gates, camera surveillance, computers, telephone systems, servers, and other sensitive electronic equipment.
⚫Best specifications in its class
⚫Intelligent real time battery backup display
⚫Smart 5% AVR with 2 step buck and boost
⚫Intelligent double stage charger control which translates to a faster recharge rate
⚫enerator compatible
⚫Highest Joule Rating 1558 Joules of surge protection
⚫All PowerShield UPS models will beep when the battery is low or failing.
⚫Usage of the Net Guard software -it can email a message to let the user know that the battery is low or failing on the UPS