Property Specification
Physical Dimensions 205 mm x 205 mm x 33.2 mm
Weight 850 g (1.87 lb)
Operating Temperature 0 ̊C to 40 ̊C (32 ̊F to 104 ̊F)
Storage Temperature -20 ̊C to 65 ̊C (-4 ̊F to 149 ̊F)
Humidity 5% to 95% non-condensing
Power Consumption 15.9 W (max) / 11.65 W (avg)
Processor RAM Qualcomm® Cypress IPQ6010-0 Quad-core A53 @1.6 GHz with
1 GB RAM and 256 MB Flash
IEEE 802.11b/g/n/ax
Frequency Band
Scanning Transmission
All regions USA & Canada
(FCC/IC)
Europe
(ETSI)
2400 ~ 2483.5 MHz 2400 ~ 2473.5 MHz 2400 ~ 2483.5 MHz
Modulation Type DSSS, OFDM, OFDMA
Peak Data Rates Up to 574 Mbps (MCS 0-15)
Antenna Integrated modular high efficiency PIFA antenna x4 (x2 per band)
Maximum Transmit Power 20 dBm
Physical Specifications
Antenna
Internal PIFA
2x2.4 GHz (2.5 dBi peak gain)
2x5 GHz (3.5 dBi peak gain)
2x2 dual band third radio (non-access)
Ethernet Ports One 2.5 Gigabit Ethernet port with RJ45 connector type.
This port can also be used to power the device using the 802.3at (PoE+).
WI-FI SPECIFICATIONS – Frequency, Modulation, and Data Rates
Reset Pinhole push button
Input Power 12V DC/1.5A (3.5 mm overall diameter/1.35 mm center pin/hole)/802.3at (PoE+)
Number of Radios
3 Wi-Fi Radios: One 2.4 GHz and 5 GHz radio each for simultaneous dual band client access.
A third dual-band radio dedicated to non-access smart scanning; WIPS, RF optimization,
remote troubleshooting, and network assurance functions.
MIMO 2x2 for 2.4/5 GHz Radios
Number of Spatial Streams 2 for 2.4/5 GHz Radios
RF Transmit Power 20 dBm per radio chain (max); Actual power for Tx will depend on Country Regulatory Domain
Simultaneous MU-MIMO Clients Two 1x1 MU-MIMO clients
Users in a MU-MIMO group with a 2x2 client 1
Bandwidth Agility Yes
Dynamic Frequency Selection Supported in compliance to all latest amendments from FCC, CE, IC, CB, TELEC, KCC regarding
certifications.