Shure(Aniusb-Matrix) 4CH In/2Ch Out USB Audio Network Interface With Matrix Mixing ANIUSB-MATRIX

SKU
444157
Brand
MPN
ANIUSB-MATRIX
Warranty
Standard Manufacturer's Warranty
Availability
In stock
Freight Estimate
$1,165.00
Buy Now And Earn 1165 Reward Points!
The ANIUSB-MATRIX Audio Network Interface provides connections for USB, Dante™, and analog audio sources. Collaborate and connect with all audio devices on a single network, with support for wireless microphones, computers, mobile devices, video codecs, and loudspeaker systems. Connect with a single network cable to receive audio and power through Power over Ethernet (PoE). Use Shure Designer software to control audio and network settings from any computer connected to the same network.

2 years manufacturing warranty
Analog Connections Input (1) 3-pin block connector (Active Balanced) Output (1) 3-pin block connector (Impedance Balanced)
USB Connections (1) USB 2.0, Type B Single port carries 1 input and 1 output channel (Summed mono)
Network Connections (Dante Digital Audio) (1) RJ45 4 input channels, 2 output channels
Power Requirements Power over Ethernet (PoE), Class 0. (PoE Plus compatible).
Power Consumption 6.5W, maximum
Dimensions H x W x D 4 x 14 x 12.8 cm ( 1.6 x 5.5 x 5.0 in.)
Control Software Shure Designer
Frequency Response 20 to 20,000 Hz
Dante Digital Audio Sampling Rate 48 kHz Bit Depth 24
USB Audio Sampling Rate 48 kHz Bit Depth 16, 24
Latency Analog to Analog 0.98 ms Analog to Dante 0.39 ms Dante to Analog 0.72 ms Dante to Dante 0.14 ms
Built-in Digital Signal Processing Per Channel Equalizer (4-band Parametric, Analog and USB output channels only) , Mute, Limiter, Gain ( 140 dB range) System Matrix mixer
Cable Requirements Cat 5e or higher (shielded cable recommended)
The ANIUSB-MATRIX Audio Network Interface provides connections for USB, Dante™, and analog audio sources. Collaborate and connect with all audio devices on a single network, with support for wireless microphones, computers, mobile devices, video codecs, and loudspeaker systems. Connect with a single network cable to receive audio and power through Power over Ethernet (PoE). Use Shure Designer software to control audio and network settings from any computer connected to the same network.