Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Allows additional run time to be quickly added as needed.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatically starts up the connected equipment upon the return of utility power.

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Install maintenance releases of firmware remotely using FTP.

Customize UPS capabilities with management cards.

Enables centralized management via the APC InfraStruXure Manager.

Provides remote power management of the UPS over the network.

Quickly understand unit and power status with visual indicators.

Provides management of the UPS via a serial port.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Minimizes installation costs by enabling the use of smaller generators and cabling.

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Provides temporary battery power when the utility power is out.

Warns when a battery is not available to provide backup power.

Provides early-warning fault analysis ensuring proactive component replacement.

Provides notification of changing utility power and UPS power conditions

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)