Shure (MXWAPX4) Mxw Next 4 Access Point Transceiver With 4 Audio Channels MXWAPX4=-Z11
SKU
443201
Brand
MPN
MXWAPX4=-Z11
Warranty
Standard Manufacturer's Warranty
$4,548.00
Buy Now And Earn 4548 Reward Points!
4-channel wireless Access Point Transceiver for Shure's Microflex Wireless (MXW) neXt conferencing systems, acting as the central hub that manages wireless mics, processes audio with built-in DSP (like echo cancellation), and connects to audio networks via Dante, USB-C, or analog, all while powered by a single Ethernet cable (PoE) for seamless integration into hybrid meetings and boardrooms.
| Working Range | 45 m (150 ft) Outdoor and line-of-sight between user and MXWAPX. Actual range depends on RF power setting, signal absorption, reflections, and interference. |
| Audio Frequency Response | 30 Hz ‒ 19 kHz (+0.5dB/3dB) Dependent on microphone type and audio output. Microphone transducers not included in measurement. MXWAPX set to Direct Mode. |
| Digital Audio Processing | 24 bit / 48 kHz |
| Digital Audio Networking | Dante, AES67 |
| Security | AES-256 Encryption Dante and DECT over-the-air |
| Latency | 18 ms (nominal) MXW1/2/6/8X microphone input to MXWAPX output. MXWAPX set to SD RF density mode. Latency depends on output port and RF density mode. |
| System Audio Polarity | Positive pressure on MXW1X/2X/6X/8X microphone diaphragm produces positive voltage on + pin (with respect to - pin) of MXWAPX analog output and a positive digital signal on the MXWAPX USB and Dante outputs. |
| Radio Transmission | Time Division Multiple Access (TDMA), Gaussian Frequency Shift Keying (GFSK), 365 kHz max. deviation |
| DECT RF Sensitivity | < -90 dBm |
| DECT RF Transmission Power | RF Power: Low 2 dBm; 2 mW RF Power: Medium 9 dBm; 8 mW RF Power: High 16 dBm (Egypt: 12 dBm); 40 mW (Egypt: 16 dBm) RF Power: Maximum 21 dBm (Egypt: 15 dBm); 125 mW (Egypt: 32 mW) |
| Cable Requirements | Cat 5e or higher, shielded, 100 m maximum between network devices |
| Analog Outputs | Line Level Output +17 dBV Aux Level Output +6 dBV Mic Level Output -13 dBV |
| Frequency Response | 20 Hz ‒ 22 kHz (+0.5 dB / -3 dB) |
| Power | 37V ‒ 57V, 12.95 W PoE Class 3 |
| Network Interface | Dual ‒ RJ45: Gigabit Ethernet, Dante digital audio |
| Antenna Type | Internal Shure Custom PIFA |
4-channel wireless Access Point Transceiver for Shure's Microflex Wireless (MXW) neXt conferencing systems, acting as the central hub that manages wireless mics, processes audio with built-in DSP (like echo cancellation), and connects to audio networks via Dante, USB-C, or analog, all while powered by a single Ethernet cable (PoE) for seamless integration into hybrid meetings and boardrooms.
