POWERSHIELD SAFEGUARD TWR 1000VA/600W , 8 OUTLETS, 2YR WTY PSG1000
SKU
416549
Brand
MPN
PSG1000
Warranty
Standard Manufacturer's Warranty
Availability
In stock
$219.00
Buy Now And Earn 219 Reward Points!
The SafeGuard UPS provides a buffer between your equipment and inconsistent mains power supply. This cost effective, compact device constantly stands guard beside your sensitive equipment. Start on battery function (cold start) Easy user replaceable battery Australian/New Zealand approved sockets Fast charging – 90% in 4 hours
| Capacity | 1000VA / 600W |
| Topology | Line Interactive |
| Voltage | 240VAC (Nominal) |
| Voltage Range | 177 to 290VAC |
| Frequency Range | 50Hz or 60Hz (Auto sensing) |
| Output Voltage | 240VAC ± 10% |
| Frequency Range (Batt Mode) | 50Hz or 60Hz ±1Hz |
| Transfer Time | 6ms (Typical) |
| Australian Outlets – UPS & Surge Protection | 4 |
| Australian Outlets – Surge Protection | 4 |
| Capacity | 12V*9Ah |
| Backup Time | 25 min (1 PC load at 100W) |
| Typical Recharge Time | 6–8 hours recover to 90% capacity |
| Full Protection | Overcharge, discharge, short circuit and thermal protection |
| Surge Protection | 475Joules /13000Amps – Best in its class |
| Data Protection | N/A |
| Interface | USB interface |
| Software | PowerShield® NetGuard® supports Windows, Linux, Unix & Mac |
| Visual Alarm | LED, AC Mode, Battery Mode, Low Battery (Batt.Mode), Fault, Overload, Remaining Time |
| Audible Alarm | Battery Mode, Low Battery (Batt. Mode), Fault, overload |
| Dimension D x W x H (mm) | 345 x 200 x 100 |
| Net Weight (kgs) | 6.6 |
| Temperature | 0–40°C |
| Humidity | 0–90% RH (non-condensing) |
| Noise Level | <40dB (no fan) |
| Safety/EMC | EN62040 - 1 - 2008, IEC60950 - 1: 2001, EN62040 - 2 2006 |
| Warranty | 2 Years |
POWERSHIELD SAFEGUARD TWR 1000VA/600W , 8 OUTLETS, 2YR WTY
