Qnap TS-h1090FU-7302P-128G, 1U 10-bay All Flash Nas, U.2/U.3 NVMe PCIe Gen4 X4 And Sata 6Gbps Bays, AMD Epyc 7302P 16C 32T 3.1GHz, 128GB Rimm DR4 Ecc, 5 Yrs Wty TS-h1090FU-7302P-128G
SKU
410828
Brand
MPN
TS-h1090FU-7302P-128G
Warranty
Standard Manufacturer's Warranty
$34,460.00
Buy Now And Earn 34460 Reward Points!
QNAP TS-h1090FU-7302P-128G, 1U 10-bay all flash NAS, U.2/U.3 NVMe PCIe Gen4 x4 and SATA 6Gbps bays, AMD EPYC 7302P 16C 32T 3.1GHz, boost up to 3.2GHz, 128GB RIMM DR4 ECC RAM, 2 x 25GbE, 2 x 2.5GbE, 2 x PCIe Gen4 x16 slots, iSCSI, NFS, SMB, FC SAN, RAID support
| SKU | TS-h1090FU-7302P-128G |
|---|---|
| UPC | 885022024483 |
| ASIN | B0B9RGLDPM |
| Brand | QNAP |
| Color | Black |
| Model | TS-h1090FU-7302P-128G |
| Power | Input Voltage: AC 100-240 V Power Supplies: 2 x 550W (redundant) Typical Power Consumption: 157.97 W (tested with drives fully populated) |
| Cooling | 5 x 60 mm fans (system fans) |
| Category | Storage |
| Hot-Swap | Yes |
| Material | Metal |
| Warranty | 5 years (standard limited warranty per manufacturer listings) |
| Processor | AMD EPYC 7302P |
| USB Ports | 3 x USB 3.2 Gen 1 (Type-A) |
| Drive Bays | 10 x 2.5" (U.2/U.3 / U.2 PCIe Gen4 x4 or SATA 6Gb/s) |
| Description | High-density 1U NVMe all-flash NAS optimized for low-latency file services, virtualization, data centers and 4K/8K streaming. The TS-h1090FU-7302P-128G is powered by an AMD EPYC 7302P 16-core/32-thread processor and ships with 128 GB RDIMM DDR4 ECC memory. It provides ten 2.5" U.2 bays that support PCIe Gen4 x4 NVMe or SATA SSDs, ZFS-based QuTS hero OS with inline deduplication/compression and dual-boot protection, dual 25GbE SFP28 plus 2x 2.5GbE RJ45 connectivity, and two PCIe Gen4 x16 expansion slots for additional NICs or accelerators. Redundant power (2 x 550W) and 5 x 60 mm fans deliver enterprise resiliency. Ideal for I/O-intensive, latency-sensitive and virtualized workloads. |
| Form Factor | 1U Rackmount |
| Memory Type | RDIMM DDR4 ECC |
| Wake on LAN | Supported (only via 2.5GbE port per manufacturer) |
| Manufacturer | QNAP |
| Sub-Category | Network Attached Storage (NAS) |
| Weight (Net) | 22.84 lb (manufacturer listings vary; boxed weight ~29.5 lb) |
| Lockable Bays | Yes |
| Product Title | QNAP TS-h1090FU-7302P-128G 10-Bay 1U NVMe All-Flash NAS (AMD EPYC 7302P, 128GB ECC, Dual 25GbE) |
| iSCSI Support | Yes (block-based and file-based iSCSI LUNs; iSER supported) |
| Drive Bay Type | U.2 (2.5"); supports NVMe Gen4 x4 and SATA SSDs |
| Maximum Memory | Up to 1 TB (1024 GB) per majority of manufacturer documentation |
| Package Weight | Approx. 29.44 lb (packaged) |
| Series/Platform | TS-h1090FU |
| CPU Architecture | 64-bit x86 (EPYC, Zen 2) |
| Expansion (PCIe) | 2 x PCIe Gen4 x16 slots (low-profile cards supported; slot dimensions published by manufacturer) |
| Features Summary | ZFS-based QuTS hero OS with inline dedupe/compression, high-density 10-bay U.2 NVMe Gen4 all-flash array, dual 25GbE + 2.5GbE network connectivity, enterprise RAID and snapshot features, 2 x PCIe Gen4 expansion slots, redundant power supplies and 5-year warranty. |
| Installed Memory | 128 GB RDIMM DDR4 ECC (installed) |
| Operating System | QNAP QuTS hero (ZFS-based), dual-boot support (QuTS hero h5.0.0 referenced) |
| Storage Features | Inline deduplication Inline compression Pool Over-provisioning TRIM support Snapshots / multi-version snapshots SSD lifespan optimization SSD cache acceleration / SSD cache RAID options |
| Flash (OS) Memory | Approximately 5 GB (dual-boot OS protection) |
| Dimensions (HxWxD) | 1.73 x 16.93 x 22.91 inches (approx. 1U) |
| Network Interfaces | 2.5GbE RJ45: 2 x RJ45 (2.5G/1G/100M/10M) 25GbE SFP28: 2 x SFP28 (25GbE) |
| Operating Humidity | 5 - 95% RH, non-condensing (wet bulb ≤27 °C) |
| Storage Temperature | -20 - 70 °C (-4 - 158 °F) |
| Included Accessories | QNAP TS-h1090FU unit Ethernet cable(s) Power cord(s) 40 x flat head screws (for 2.5" drives) 2 x drive tray keys 2 x holders 2 x hangers Quick Installation Guide |
| Memory Slots / DIMMs | 12 Long-DIMM slots |
| Operating Temperature | 0 - 40 °C (32 - 104 °F) |
| Package Contents Note | System is shipped without SSDs (drives not included). |
| RAID Levels Supported | Single JBOD RAID 0 RAID 1 RAID 5 RAID 6 RAID 10 RAID 50 RAID 60 |
| Security / Encryption | 256-bit AES AES-NI FIPS 140-2 (listed in some vendor specs) TLS 1.0/1.1/1.2/1.3 |
| Management & Protocols | SMB/CIFS NFS v3/v4 AFP iSCSI WebDAV DDNS, FTP, SFTP SNMP, SSH, HTTPS, RADIUS QuWAN, Qsync, QuMagie and other QNAP services (per feature list) |
| Processor Cores / Threads | 16 cores / 32 threads |
| Processor Max Turbo Speed | Up to 3.3 GHz |
| Supported Drive Compatibility | 2.5-inch U.2 NVMe Gen4 x4 SSDs 2.5-inch SATA SSDs (SATA III / 6Gbps) |
| Item Weight (per some listings) | 29.3 lb (varies by source) |
| Notes / Manufacturer References | Some vendor listings reference alternate max memory capacities (1 TB vs 1.536 TB). Selected maximum memory (1 TB / 1024 GB) follows majority of manufacturer documentation provided in sources. System supports alternate CPU configurations (EPYC 7232P/7252) in other SKUs. |
| Available Model Variants (from manufacturer info) | TS-h1090FU-7232P-64G (AMD EPYC 7232P/7252, 64 GB RDIMM) TS-h1090FU-7302P-128G (this model) TS-h1090FU-7302P-256G (by request) |
QNAP TS-h1090FU-7302P-128G, 1U 10-bay all flash NAS, U.2/U.3 NVMe PCIe Gen4 x4 and SATA 6Gbps bays, AMD EPYC 7302P 16C 32T 3.1GHz, 128GB RIMM DR4 ECC, 5 Yrs WTY
